DIR Return Create A Forum - Home
---------------------------------------------------------
Old Leafsprung Land Rovers
HTML https://ollr.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Technical tips & Questions
*****************************************************
#Post#: 32339--------------------------------------------------
Photo of SWB with tub floor removed?
DIR By: DARKSIDE
Date: July 27, 2012, 2:14 am
---------------------------------------------------------
Morning all
I have a bit of welding to do on the rear chassis legs.
Can't be arsed to lie on the floor and weld.
Does any one have a pic of a Series 2/3 SWB with the rear floor
out so I can see how much I can reach easily?
#Post#: 32922--------------------------------------------------
Re: Photo of SWB with tub floor removed?
DIR By: TrueS2
Date: August 1, 2012, 8:01 am
---------------------------------------------------------
Hi, don't have a pic, but if you are planning to remove the
floor only, then the crossbeams are in your way, and the
longitudonal stringers will nee to come out with the floor.
Which proves complicated as they are spot welded to the
transverse bulkhead behind your seats...
Far easier and simpler to remove the tub as one piece and have a
go at your chassis without anythin in the way.
regards
trueS2
#Post#: 32939--------------------------------------------------
Re: Photo of SWB with tub floor removed?
DIR By: dave88sw
Date: August 1, 2012, 12:43 pm
---------------------------------------------------------
Or you can be a total mong and cut two big holes in the floor to
weld the top of the rail like the previous owner did to mine
#Post#: 32964--------------------------------------------------
Re: Photo of SWB with tub floor removed?
DIR By: DARKSIDE
Date: August 1, 2012, 3:50 pm
---------------------------------------------------------
I was kind of hoping that wasn't going to be the case. Can't be
arsed to remove the tub though!!
*****************************************************
Page 1 of 1