DIR Return Create A Forum - Home
---------------------------------------------------------
Old Leafsprung Land Rovers
HTML https://ollr.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Members' Motors
*****************************************************
#Post#: 26051--------------------------------------------------
Re: Happy burfday to me !!!
DIR By: mistericeman
Date: June 6, 2012, 6:30 pm
---------------------------------------------------------
Which hoop are you short of .....Fnarrrr
Think i have a drop in rear one and a bolt on flat footed one
here if either are any help
:thumbs:
#Post#: 26101--------------------------------------------------
Re: Happy burfday to me !!!
DIR By: mr.scruff
Date: June 7, 2012, 6:32 am
---------------------------------------------------------
Happy Birthday Mrs G...
Munkie and myself and no doubt a few other Worthingites knew of
this Landy and it's good to see it is finally going to get some
TLC.
That sand coloured Lightweight in the background can tell some
stories...!!! :eek: :eek:
#Post#: 26153--------------------------------------------------
Re: Happy burfday to me !!!
DIR By: Luke
Date: June 7, 2012, 12:33 pm
---------------------------------------------------------
Happy birthday Leslie!
8)
#Post#: 26158--------------------------------------------------
Re: Happy burfday to me !!!
DIR By: landyboy
Date: June 7, 2012, 12:51 pm
---------------------------------------------------------
You didnt call in! Fredi has been through my ownership :)
#Post#: 54053--------------------------------------------------
Re: Happy burfday to me !!!
DIR By: Gadget
Date: March 9, 2013, 1:08 pm
---------------------------------------------------------
Right its been a while. I've been in the shed working on the
engine that will be going into ffragle. We are putting the old
engine from wsl into ffragle due to the one fitted being an
unknown. The ffr timing case andoil cooler system are being
swapped overalong with fresh crank oil seals and gaskets. The
unleaded head from wsl is going on as well followed by a few
coats of paint.
Thanks to Lucy and Stuey for the help in stripping down the
front end. There are photos but having fun trying to down load
them. Thanks to big Chris for the use of the big sockets.
#Post#: 55356--------------------------------------------------
Re: Happy burfday to me !!!
DIR By: Mrs Gadget
Date: March 24, 2013, 1:25 pm
---------------------------------------------------------
Woo hoo I got to use Lucys engine lift today.Ffraggle how has
shed her old engine and is now set for her welderthonification
next weekend. Hope the 6in of snow we worked in today has all
gone :eek:
If anyone fancies giving us a hand ( if your not helping the
OVSs
:-*) it would be most welcome. I will provide bacon butties !
#Post#: 55364--------------------------------------------------
Re: Happy burfday to me !!!
DIR By: Lucy
Date: March 24, 2013, 2:27 pm
---------------------------------------------------------
Glad it was of use :-) no rush to return it, I've got no engine
swaps planned, just a misbehaving gearbox to sort, don't need it
for that though.
#Post#: 55636--------------------------------------------------
Re: Happy burfday to me !!!
DIR By: Mrs Gadget
Date: March 28, 2013, 8:56 am
---------------------------------------------------------
2 x New Front Dumb irons - check
New Front Bulkhead out rigger - check
Thermostat - check
Door hinge stuff - check
Footwell repair stuff - check
Gaskets - various - check
Lots of bulk head repair pannels - check
Welding wire - check
Plasma cutter - check (Cheers Stuey)
Grinding disks - check
Welder - check
Mr Gadget - check
All we need now is the soddin' snow & rain to stop so that we
can get crackin'.
:smiley-furious:
*****************************************************
Page 4 of 4
DIR Previous Page