DIR Return Create A Forum - Home
---------------------------------------------------------
The Mighty Nuovo Falcone VOC
HTML https://nuovofalcone.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Frame, Suspension and Tinware
*****************************************************
#Post#: 2815--------------------------------------------------
fork
DIR By: monohorizontal
Date: June 9, 2020, 2:52 pm
---------------------------------------------------------
good evening I do not know if the subject on the fork springs
too weak on the falcone has already been discussed, they can be
replaced by other stronger models? or reinforced
#Post#: 2816--------------------------------------------------
Re: fork
DIR By: banquo
Date: June 10, 2020, 4:20 am
---------------------------------------------------------
Morning mono; there's a company in Germany who supplies
progressive springs as a kit. Wirth is the company. Here's a
link to them on UK eBay, but I guess they will be available via
eBay.fr
HTML https://www.ebay.co.uk/itm/Moto-Guzzi-Nuovo-Falcone-Wirth-Progressive-Gabelfedern-und-Gabelol/123555021980
Yes; please look here:
HTML https://www.ebay.fr/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=Moto-Guzzi+Nuovo+Falcone+-+Wirth&_sacat=0
#Post#: 2817--------------------------------------------------
Re: fork
DIR By: monohorizontal
Date: June 10, 2020, 5:08 am
---------------------------------------------------------
salut banquo oui merci je vais étudier ça les ressorts
d'origines sont déjà un peu faibles mais en side car c'est
encore légèrement plus faible ;)
#Post#: 2837--------------------------------------------------
Re: fork
DIR By: monohorizontal
Date: June 28, 2020, 12:19 pm
---------------------------------------------------------
salut banquo j'ai opté pour cette solution simple est efficace 2
entretoises nylon M12 24 mm de diamètre externe x 15 mm de long
c'est parfait
HTML https://www.ebay.fr/itm/12-x-Jet-Black-Nylon-Plastic-SPACERS-Standoff-Washer-M2-M3-M4-M5-M6-M8-M10-M12/302019421824?hash=item4651c2a680:g:v94AAOSwtnpXj6GH<br
/> ;)
#Post#: 2843--------------------------------------------------
Re: fork
DIR By: banquo
Date: July 17, 2020, 3:33 am
---------------------------------------------------------
Somple. I suppose it's like adding some pre-load...
Was it not difficult to re-fit the caps on top?
#Post#: 2846--------------------------------------------------
Re: fourchette
DIR By: monohorizontal
Date: July 17, 2020, 8:41 am
---------------------------------------------------------
hello by lifting the front of the bike with the jack and pushing
the tube down press the cap with a tube and screw by hand quick
and very easy the result is very good with 15mm on my sport
lighter falcone and 25mm on the blue side car
#Post#: 2847--------------------------------------------------
Re: fork
DIR By: banquo
Date: July 17, 2020, 9:19 am
---------------------------------------------------------
Sounds good mono - quick, cheap and simple!
*****************************************************
Page 1 of 1