DIR Return Create A Forum - Home
       ---------------------------------------------------------
       The Mighty Nuovo Falcone VOC
  HTML https://nuovofalcone.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Engine and Transmission
       *****************************************************
       #Post#: 2535--------------------------------------------------
       valve springs
       By: olebmw Date: January 15, 2019, 4:22 pm
       ---------------------------------------------------------
       I think I have read all the information I can find on installing
       lighter valves and springs.
       What amount of spring pressure reduction from the stock spring
       should I use?
       What is the material of choice to make the guides out of?
       Any new information on 8 m.m. donor valves to use?
       #Post#: 2536--------------------------------------------------
       Re: valve springs
       By: banquo Date: January 24, 2019, 1:35 pm
       ---------------------------------------------------------
       Sorry olebmw, but the fact is, there's no longer enough traffic
       on here to get much response. You'll get a better response from
       our Facebook Group, or if you head over to Leafman's NF thread
       on advrider.
       I've heard that Ducati valves are used, but as I had my head
       done, I don't have any details, although I'm pretty sure I had
       one 8mm and one 9mm stem, guides with oil seals, and both valves
       were too short in the stem, so needed machined caps on the end
       to make up the space.
       Not much help, I know.
       *****************************************************