DIR Return Create A Forum - Home
---------------------------------------------------------
The Mighty Nuovo Falcone VOC
HTML https://nuovofalcone.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Wanted and For Sale
*****************************************************
#Post#: 1936--------------------------------------------------
mikuni for nuovo
By: bill bikie Date: April 26, 2017, 2:24 pm
---------------------------------------------------------
has any one fitted a mikuni carb to the nuovo. The delorto I
have is stuffed and always runs rich. Need jet sizes and needle
.
#Post#: 1937--------------------------------------------------
Re: mikuni for nuovo
By: mobydick Date: April 26, 2017, 5:44 pm
---------------------------------------------------------
I contacted eurocarb and asked for the currently available
equivalent Delorto which would fit straight on to the existing
manifold,it works really well. I can get you the model number if
you want. -Moby Dick.
#Post#: 1938--------------------------------------------------
Re: mikuni for nuovo
By: bill bikie Date: April 26, 2017, 7:10 pm
---------------------------------------------------------
Could you please give me the model etc.
I have had 3 experts look at the old one.
Time to put it on the shelf.
#Post#: 1941--------------------------------------------------
Re: mikuni for nuovo
By: mobydick Date: April 27, 2017, 7:22 am
---------------------------------------------------------
Hi ,I bought this in 2013 and at that time it cost me £115 + vat
and p&p. It is a Dellorto PHBH 30 AS 4-stroke I
told them the model of bike it was for and asked for a price, it
came with a choice of jets all of which I tried. It comes as
standard with a plastic float chamber, after I was sure it was
the way I wanted to go I ordered an alloy replacement. I tried
various air filters (but not the standard box with mini filter
on reflection that might have been ok) in the end settled for a
bellmouth with full mesh. Hope this is helpful. - Moby Dick.
#Post#: 1943--------------------------------------------------
Re: mikuni for nuovo
By: bill bikie Date: April 28, 2017, 3:30 am
---------------------------------------------------------
Thanks for the help. When finished will post a picture.
#Post#: 1945--------------------------------------------------
Re: mikuni for nuovo
By: banquo Date: April 28, 2017, 3:55 am
---------------------------------------------------------
[quote author=mobydick link=topic=309.msg1941#msg1941
date=1493295776]
Hi ,I bought this in 2013 and at that time it cost me £115 + vat
and p&p. It is a Dellorto PHBH 30 AS 4-stroke I
told them the model of bike it was for and asked for a price, it
came with a choice of jets all of which I tried. It comes as
standard with a plastic float chamber, after I was sure it was
the way I wanted to go I ordered an alloy replacement. I tried
various air filters (but not the standard box with mini filter
on reflection that might have been ok) in the end settled for a
bellmouth with full mesh. Hope this is helpful. - Moby Dick.
[/quote]
Have you got a record of the jets you actually used MD?
#Post#: 1946--------------------------------------------------
Re: mikuni for nuovo
By: mobydick Date: April 28, 2017, 11:55 am
---------------------------------------------------------
OK the carb comes with 45 , 48 and 52 idle jets and 116 , 120
and 125 main jets . I started with the largest and worked my
way down. 52 /125 seemed to big , 48 / 120 ran ok I moved down
to the smallest and I thought it was marginally better and have
left it like that. However I did open up the baffle in the gold
star silencer after that and it might be worth trying 48/120
again. As I said before I am running with a gauze bellmouth. -
MD
*****************************************************