DIR Return Create A Forum - Home
       ---------------------------------------------------------
       The Mighty Nuovo Falcone VOC
  HTML https://nuovofalcone.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Frame, Suspension and Tinware
       *****************************************************
       #Post#: 1822--------------------------------------------------
       Screen height on NF Military.
   DIR By: velocette 1
       Date: February 21, 2017, 1:33 pm
       ---------------------------------------------------------
       I have over the weekend managed to acquire a Might Nuovo
       Military.Having test ridden a few recently I have found the
       screen height to be right in my line of sight.Has anyone else
       found this and is there a way around this short of surgery.
       #Post#: 1823--------------------------------------------------
       Re: Screen height on NF Military.
   DIR By: huub
       Date: February 24, 2017, 4:01 am
       ---------------------------------------------------------
       congratuliation with your new ride.
       i have the police fairing, and with the original single police
       seat i can look over the screen
       here is my girlfriend riding as you can see she -just- looks
       over the screen too
       [IMG]
  HTML http://i1375.photobucket.com/albums/ag459/huubc1/falconeontour_zpsc7406004.jpg[/img]
       #Post#: 1824--------------------------------------------------
       Re: Screen height on NF Military.
   DIR By: banquo
       Date: February 24, 2017, 9:40 am
       ---------------------------------------------------------
       --- Quote from: velocette 1 link ---
       > I have found the screen height to be right in my line of
       sight.Has anyone else found this and is there a way around this
       short of surgery.
       >
       --- End Quote ---
       There are options of course, but possibly not to your liking.
       Obviously, the screen can't be adjusted up or down, as the
       headlamp goes through it. It will be possible to cut down the
       screen itself, but this is not for the faint hearted, and can go
       horribly wrong.
       Here's one article on doing it:
  HTML http://www.motorcyclecruiser.com/how-to-cut-down-motorcycle-windshields-safety
  HTML http://
  HTML http://www.motorcyclecruiser.com/how-to-cut-down-motorcycle-windshields-safety
       It does the slopy shoulder on the key point of blade and speed
       choice. In my own experience, a blade designed for plastics and
       with fine teeth is needed, and the cut needs to be slow, so a
       variable speed jigsaw (or hand saw if you're skilled) is
       required. Too fast and the plastic melts, which isn't the end of
       the world, but makes finishing off much harder.
       As an alternative, you could change the seat height.
       One of our local guys fitted a pair of squash balls inside the
       coil springs to reduce compression, and possibly even that
       simple modification may take you up far enough.
       I changed my seat on my Harley for a touring one, and had to buy
       a low profile screen as a result, so it doesn't take much.
       Oh, and the really easy solution. Sell the existing fairing and
       screen for lots of money, and invest some of it in a universal
       screen. Won't look half as good though.
       Hope that's some help.
       *****************************************************
       Page 1 of 1