DIR Return Create A Forum - Home
       ---------------------------------------------------------
       The Mighty Nuovo Falcone VOC
  HTML https://nuovofalcone.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Wanted and For Sale
       *****************************************************
       #Post#: 1185--------------------------------------------------
       Re choke lever
       By: Mad99mike Date: December 6, 2015, 1:55 pm
       ---------------------------------------------------------
       Hi guess I broke it some how I have one of the last sahara
       falcone so I have broke the casting of the choke lever on the
       handle bar right hand side this seems to bolt to the front brake
       lever with a nut in a recess from underneath has any got a good
       used item or know where I can get a new one mine is all alloy I
       have seen one with a blank center on gutsi
       Regards mikebits
       #Post#: 1186--------------------------------------------------
       Re: Re choke lever
       By: banquo Date: December 8, 2015, 10:03 am
       ---------------------------------------------------------
       Which part is broken Mike?
       Any photos?
       The levers themselves come up and are available, but the alloy
       ones are very expensive.
       Here's one of the plastic ones the 'may' be the right part.
       If it's the body of the lever that's broken, you may be able to
       get your local alloy welder to sort it.
       I bought a spare timing cover off eBay, which was fine, except
       that the clutch cable lug was broken.
       A tenner to my local guy and it was built back up again.
       Plastic lever on eBay here
  HTML http://www.ebay.co.uk/itm/Ducati-Bevel-750-900-SS-Choke-Lever-also-Laverda-750-GT-S-SF-Moto-Guzzi-V7-850-/331724161330?hash=item4d3c4d0132:g:v18AAOSwfZ1WYMUd<br
       />
       Metal lever at jaw dropping prices here
  HTML http://www.gawa-guzzi.de/****pit.html#a13
       #Post#: 1187--------------------------------------------------
       Re: Re choke lever
       By: Mad99mike Date: December 12, 2015, 11:50 am
       ---------------------------------------------------------
       Hi thanks for that it is all alloy and broke where the cable
       feeds in I will try and fine the bit in the workshop yep got a
       friend who alloy welds if I can find the bit guess it's not
       under a lot of stress
       Thanks again regards mike
       *****************************************************