DIR Return Create A Forum - Home
---------------------------------------------------------
The Mighty Nuovo Falcone VOC
HTML https://nuovofalcone.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Engine and Transmission
*****************************************************
#Post#: 768--------------------------------------------------
HELPPPPP
DIR By: grumpy1
Date: June 4, 2015, 2:00 pm
---------------------------------------------------------
trying to get off the endcap thats outside the front sprocket.
supposed to be left hand thread. says to tap it off with a punch
in the book I have. not budging. not budging at all. any ideas
if there is some knack to this or what? Or can I get one so I
can take the grinder to the one on the bike?HELP PLEASE. Engine
is in bits otherwise and this has to come off so I can split the
cases
#Post#: 771--------------------------------------------------
Re: HELPPPPP
DIR By: banquo
Date: June 6, 2015, 6:42 am
---------------------------------------------------------
Covered on Facebook Page (stillsons and a lump of alloy to lock
the sprocket)
HTML http://i5.photobucket.com/albums/y176/Kommer/P1011354_zps0ae4eddd.jpg
Thanks to Nitram
#Post#: 774--------------------------------------------------
Re: HELPPPPP
DIR By: grumpy1
Date: June 6, 2015, 6:48 am
---------------------------------------------------------
thanks again. just tried it. didnt work >:(
#Post#: 776--------------------------------------------------
Re: HELPPPPP
DIR By: banquo
Date: June 6, 2015, 6:53 am
---------------------------------------------------------
Bugger! It must be pretty tight, or well seized. Have you tried
putting some heat on it?
#Post#: 786--------------------------------------------------
Re: HELPPPPP
DIR By: grumpy1
Date: June 6, 2015, 2:19 pm
---------------------------------------------------------
buddy says he has sockets for the castle nut so ill try that
next. something has to work ;D
#Post#: 787--------------------------------------------------
Re: HELPPPPP
DIR By: banquo
Date: June 6, 2015, 3:25 pm
---------------------------------------------------------
Yep; you'll get there eventually. :D
I'd have been inclined to get a propane torch on it to break the
seizure onto the shaft.
#Post#: 790--------------------------------------------------
Re: HELPPPPP
DIR By: grumpy1
Date: June 6, 2015, 3:55 pm
---------------------------------------------------------
tried heat but maybe not enough. ANGLE GRINDER is looking
good.lol
#Post#: 791--------------------------------------------------
Re: HELPPPPP
DIR By: banquo
Date: June 6, 2015, 4:02 pm
---------------------------------------------------------
Lock it away!
#Post#: 794--------------------------------------------------
Re: HELPPPPP
DIR By: huub
Date: June 7, 2015, 2:39 pm
---------------------------------------------------------
just make/buy /borrow the proper tool , and use a rattle gun.
using stillsons and a piece of alloy puts all the force on the
gear dogs, wich are prone to shear off anyway.
#Post#: 796--------------------------------------------------
Re: HELPPPPP
DIR By: grumpy1
Date: June 8, 2015, 4:52 am
---------------------------------------------------------
just waiting for proper socket now.
*****************************************************
Page 1 of 1