DIR Return Create A Forum - Home
---------------------------------------------------------
MT Owners Club
HTML https://mtowners.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: MT-01
*****************************************************
#Post#: 408--------------------------------------------------
cutting standard seat
DIR By: mt01ash
Date: August 22, 2018, 4:16 am
---------------------------------------------------------
OK I have a dual seat that I want to cut out the rear part so I
can use it with the single seat setup I had one previous mt01
but lost the photo as to wear to cut the plastic has anyone got
a photo of the under side of the cut sea so I can copy it
#Post#: 410--------------------------------------------------
Re: cutting standard seat
DIR By: Saint Rob
Date: August 23, 2018, 2:49 pm
---------------------------------------------------------
Nikk's got a single seat on his SP hasn't he, have you tried
sending a PM?
#Post#: 413--------------------------------------------------
Re: cutting standard seat
DIR By: Rocker
Date: August 24, 2018, 2:02 pm
---------------------------------------------------------
[URL=
HTML https://beta.photobucket.com/u/JocktheRocker/p/02d2543b-7e7e-494e-abd3-40319822f996][img<br
/>width=810
height=1080]
HTML https://beta-static.photobucket.com/images/r633/JocktheRocker/s0/02d2543b-7e7e-494e-abd3-40319822f996-original.jpg?width=1920&height=1080&fit=bounds[/img][/URL]
[URL=
HTML https://beta.photobucket.com/u/JocktheRocker/p/897f2b96-a982-4387-a1e4-7917c4ea1dde][img<br
/>width=810
height=1080]
HTML https://beta-static.photobucket.com/images/r633/JocktheRocker/s0/897f2b96-a982-4387-a1e4-7917c4ea1dde-original.jpg?width=1920&height=1080&fit=bounds[/img][/URL]
[URL=
HTML https://beta.photobucket.com/u/JocktheRocker/p/47f1c540-b7c4-43ab-b418-e9ca174872d7][img<br
/>width=810
height=1080]
HTML https://beta-static.photobucket.com/images/r633/JocktheRocker/s0/47f1c540-b7c4-43ab-b418-e9ca174872d7-original.jpg?
width=1920&height=1080&fit=bounds[/img][/URL]
[URL=
HTML https://beta.photobucket.com/u/JocktheRocker/p/b11f4280-1f21-4da0-8c34-96ba628024ea][img<br
/>width=810
height=1080]
HTML https://beta-static.photobucket.com/images/r633/JocktheRocker/s0/b11f4280-1f21-4da0-8c34-96ba628024ea-original.jpg?width=1920&height=1080&fit=bounds[/img][/URL]
Hope this will help :)
#Post#: 414--------------------------------------------------
Re: cutting standard seat
DIR By: mt01ash
Date: August 25, 2018, 7:31 am
---------------------------------------------------------
Thanks you its a start I do think my old one was cut more as it
needs to let the carbon tail cover to fit into the cut out think
I may need to remove the carbon tail and cut around it but will
try this first Thanks
#Post#: 416--------------------------------------------------
Re: cutting standard seat
DIR By: Rocker
Date: August 25, 2018, 8:49 am
---------------------------------------------------------
--- Quote from: mt01ash link ---
>
> Thanks you its a start I do think my old one was cut more as
it needs to let the carbon tail cover to fit into the cut out
think I may need to remove the carbon tail and cut around it but
will try this first Thanks
>
--- End Quote ---
This is a Yamaha made single seat (they do look rough) but
sounds like a good plan using the tail piece as a pattern :)
#Post#: 427--------------------------------------------------
Re: cutting standard seat
DIR By: omeo-mt01
Date: September 3, 2018, 4:50 am
---------------------------------------------------------
--- Quote from: Rocker link ---
>
> [quote author=mt01ash link=topic=72.msg414#msg414
date=1535200282]
> Thanks you its a start I do think my old one was cut more as
it needs to let the carbon tail cover to fit into the cut out
think I may need to remove the carbon tail and cut around it but
will try this first Thanks
>
--- End Quote ---
This is a Yamaha made single seat (they do look rough) but
sounds like a good plan using the tail piece as a pattern :)
[/quote]
Just seen this, I,ll do a pic for you tomorrow. They are just a
standard base cut off pretty rough.
#Post#: 433--------------------------------------------------
Re: cutting standard seat
DIR By: omeo-mt01
Date: September 4, 2018, 6:00 am
---------------------------------------------------------
--- Quote from: omeo-mt01 link ---
>
> [quote author=Rocker link=topic=72.msg416#msg416
date=1535204950]
> [quote author=mt01ash link=topic=72.msg414#msg414
date=1535200282]
> Thanks you its a start I do think my old one was cut more as
it needs to let the carbon tail cover to fit into the cut out
think I may need to remove the carbon tail and cut around it but
will try this first Thanks
>
--- End Quote ---
This is a Yamaha made single seat (they do look rough) but
sounds like a good plan using the tail piece as a pattern :)
[/quote]
Just seen this, I,ll do a pic for you tomorrow. They are just a
standard base cut off pretty rough.
[/quote]
Sorry, busy busy, tomorrow, promise.
#Post#: 442--------------------------------------------------
Re: cutting standard seat
DIR By: mt01ash
Date: September 6, 2018, 2:46 pm
---------------------------------------------------------
OK made the cut looks like it fits ok and locks in so ill add
some webbing and recover
#Post#: 446--------------------------------------------------
Re: cutting standard seat
DIR By: mt01ash
Date: September 12, 2018, 3:08 pm
---------------------------------------------------------
All done rear foot rest to put back on with the single seat set
up
#Post#: 449--------------------------------------------------
Re: cutting standard seat
DIR By: Rocker
Date: September 13, 2018, 3:11 am
---------------------------------------------------------
Arr I see what you're doing now, I did the same but cut the
carbon tail so the seat stayed whole
[URL=
HTML https://beta.photobucket.com/u/JocktheRocker/p/6693d028-8f46-44ea-873a-207ebfdf5109][img<br
/>width=609
height=1080]
HTML https://beta-static.photobucket.com/images/r633/JocktheRocker/s0/6693d028-8f46-44ea-873a-207ebfdf5109-original.jpg?width=1920&height=1080&fit=bounds[/img][/URL]
[URL=
HTML https://beta.photobucket.com/u/JocktheRocker/p/cb4fa146-edac-455e-86c3-4d2806b86ccf][img<br
/>width=609
height=1080]
HTML https://beta-static.photobucket.com/images/r633/JocktheRocker/s0/cb4fa146-edac-455e-86c3-4d2806b86ccf-original.jpg?width=1920&height=1080&fit=bounds[/img][/URL]
As I said you'll have to drill out the plate and bolt the
footrest right though with maybe a spacer or two I can't really
remember it was a while ago and I'm not running with that set up
now
*****************************************************
Page 1 of 2
DIR Next Page