DIR Return Create A Forum - Home
---------------------------------------------------------
MT Owners Club
HTML https://mtowners.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: MT-01
*****************************************************
#Post#: 371--------------------------------------------------
MT-01 Stock muffler mod
DIR By: whisperdancer
Date: July 24, 2018, 8:43 am
---------------------------------------------------------
Glad to be back!!!
The old MTOC had a lot of info about modded stock mufflers, but
unfortunatelly... now it's gone, since Lazarus took it of in his
Diavel... ;D
For the register, here is the mod I made to mine:
HTML https://www.youtube.com/watch?v=f8R7H4LVQnY&t=
Here is the sound after bringing the db killer out of the caps
(the overun noise was terrible):
HTML https://www.youtube.com/watch?v=XNZpznuHcGw
And with the larger 50mm db killers:
HTML https://www.youtube.com/watch?v=L5nNXTUsav0
Still have to make the Akra style endcaps...
#Post#: 377--------------------------------------------------
Re: MT-01 Stock muffler mod
DIR By: Winty
Date: July 29, 2018, 5:35 am
---------------------------------------------------------
About 2 years ago a fantastic popping sound alerted me to the
fact that the entire contents of my righthand side Ralph Elliott
modded silencer had launched itself down the A38!
So I rebuild them from scratch myself.
I found the best sound and performance came from packing them
with stainless steel wool pads (like Brillo Pads).
I used stainless steel perforated tube inside and machined
aluminium end caps from solid billet on my lathe.
Sound is lovely,louder than standard but not as loud as the
'Ralph Elliots'.
I would recommend the Elliot nodded silencer mine were 3 years
old before the rh one launched itself.
#Post#: 383--------------------------------------------------
Re: MT-01 Stock muffler mod
DIR By: whisperdancer
Date: August 1, 2018, 11:39 am
---------------------------------------------------------
I hope that never happens to me.
I did use 8 bolts on each machined cap just to be sure, as the
pressure inside the muffler must be bery high (especially with
resctricted ends using a db killer).
True the db killers just use 4 of them, but the akras used just
3... should be fine (crossing fingers).
#Post#: 384--------------------------------------------------
Re: MT-01 Stock muffler mod
DIR By: DLMA23
Date: August 2, 2018, 4:02 pm
---------------------------------------------------------
Kodo...kudos on your skills & the excellent mod whisperdancer
8)
*****************************************************
Page 1 of 1