DIR Return Create A Forum - Home
       ---------------------------------------------------------
       MT Owners Club
  HTML https://mtowners.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: MT-01
       *****************************************************
       #Post#: 365--------------------------------------------------
       moving the garbage....
   DIR By: Vishnuisgod
       Date: July 17, 2018, 12:48 am
       ---------------------------------------------------------
       Today I replaced the battery, after 12 years it wouldnt keep a
       charge over night... Its done its duties, and lesson learned, a
       trickle charger sucks...
       im not supposed to be riding, we have to ship-out, at some
       indeterminate time (lucky if we get 48hrs notice), so Ive got ti
       eon my hands...
       As Im prone to do, I took everything apart under the
       seat....cleeeaaannnnn!!!!
       And I worked my way up  to the tank, and and and...
       so my Q's, has anybody moved the stuff under the covers on the
       sides of the MT?
       on the left side, theres the gas puke (overflow) and vent tubes,
       with some kind of valve....
       has anybody moved them?
       havent got to the right side, I dont remeber whats there....
       could it be tucked up under where the air box was/is?
       cheers
       alan
       #Post#: 381--------------------------------------------------
       Re: moving the garbage....
   DIR By: Max Headroom
       Date: August 1, 2018, 7:24 am
       ---------------------------------------------------------
       Hi Alan,
       Yes the stuff can be removed from both sides. I housed the fuel
       stuff on the right under the tank in the side of the frame then
       filed the mounting bracket smooth and added a bit of mesh (see
       photo). I extended the tubes for the overflow bits on the left
       and mounted them below the crank case, you can see from the
       photo how I mounted the regulator (think it's a regulator
       anyway). I used steel tube to extend the overflow tubing so I
       could bend it to fit just as I wanted, see photo. everything's a
       bit grubby as I was half way through other mods :)
       [attach=1][attach=2][attach=3]
       *****************************************************
       Page 1 of 1