DIR Return Create A Forum - Home
---------------------------------------------------------
MT Owners Club
HTML https://mtowners.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: MT-01
*****************************************************
#Post#: 1230--------------------------------------------------
Re: Rear Sets
DIR By: TimR
Date: April 11, 2021, 3:05 am
---------------------------------------------------------
Rizoma parts, of which a great many already have some, are all
polished natural aluminium....
I could live with this as a variation, if it was possible to
simply forego the cut outs as indicated, and the anodising....?
They look great BTW.
#Post#: 1231--------------------------------------------------
Re: Rear Sets
DIR By: Max Headroom
Date: April 11, 2021, 5:21 am
---------------------------------------------------------
I’ve been chatting with Nikk and he reminded me neither the
rearsets or cover were anodised, so I’ll produce all parts
natural aluminium and offer anodising as an extra. On the cut
outs, I’ve got to do some stress work so they may change to
being a bit of relief rather than cut through.
#Post#: 1232--------------------------------------------------
Re: Rear Sets
DIR By: Blzeebub
Date: April 11, 2021, 9:04 am
---------------------------------------------------------
Is the sprocket cover from billet in one piece? The Flyhammer
one is a 2 piece which i'm guessing cuts the costs.
B-)
#Post#: 1233--------------------------------------------------
Re: Rear Sets
DIR By: Nikk
Date: April 11, 2021, 12:07 pm
---------------------------------------------------------
Looking good.
Personally I'd say the MT logo should be a bit more subtle, with
less height from the main body of the cover, but otherwise
great!
#Post#: 1234--------------------------------------------------
Re: Rear Sets
DIR By: Max Headroom
Date: April 13, 2021, 4:06 am
---------------------------------------------------------
Re-flyhammer; New cover is one piece from billet but should be
around the same price.
Re-logo; I’ve already reduced it to 3mm
#Post#: 1241--------------------------------------------------
Re: Rear Sets
DIR By: omeo-mt01
Date: April 16, 2021, 5:38 am
---------------------------------------------------------
So, I too am happy with the standards but tell me, with the
solid mounting, how much more are you feeling through the feet?
#Post#: 1242--------------------------------------------------
Re: Rear Sets
DIR By: Max Headroom
Date: April 16, 2021, 7:57 am
---------------------------------------------------------
Hi Graeme,
Personally I've not noticed an increase in vibration from the
rearsets, but there must be some increase, maybe boots absorb
some?
#Post#: 1244--------------------------------------------------
Re: Rear Sets
DIR By: TimR
Date: April 17, 2021, 1:54 am
---------------------------------------------------------
--- Quote from: graeme link ---
>
> So, I too am happy with the standards but tell me, with the
solid mounting, how much more are you feeling through the feet?
>
--- End Quote ---
Its such a long while back I did this. I have 50K miles with
Rizoma controls, and not needed new bearings at all. What I do I
remember is being pleased with the increased tactile feeling
from the rearsets and decent levers ( rizoma )...Im fairly
sensitive to vibration, having held a chainsaw in my working
life for many years - the solid mount rearsets do not give any
problems in this regard....
#Post#: 1245--------------------------------------------------
Re: Rear Sets
DIR By: TimR
Date: April 17, 2021, 2:04 am
---------------------------------------------------------
Something else Id like to put out there @Max Headroom; if the
actual footrest pegs, the bar your foot rest on when using them,
if these could be a replacement to the originals, that would be
fantastic. Mine are polished and smooth after 50K miles, and
it's becoming an issue to keep your feet from slipping off,
especially when wet....If you didnt insist on styling yours so
differently from the originals, but anyway made them fixed in
the same way, a pair could be easily bought separately, to
replace worn originals....?
I feel like a lobbyist for Rizoma.... ::)
#Post#: 1250--------------------------------------------------
Re: Rear Sets
DIR By: Max Headroom
Date: April 19, 2021, 9:58 am
---------------------------------------------------------
Jesus Tim, your list just gets longer and longer :) I'm just
working on the design of the lever/footpeg mounting so I'll try
stick to the original interface for the peg so you can use it.
Keep you posted.
*****************************************************
Page 2 of 3
DIR Previous Page
DIR Next Page