URI:
   DIR Return Create A Forum - Home
       ---------------------------------------------------------
       MT Owners Club
  HTML https://mtowners.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: MT-01
       *****************************************************
       #Post#: 1064--------------------------------------------------
       Where is located the screw for rear compression damping adjustem
       ent?
       By: Claude Date: August 22, 2020, 9:48 am
       ---------------------------------------------------------
       As the title says...
       I know, stupid question but I'm new to the MT01 world. I want to
       adjust both suspensions and can't find the screw for rear
       compression damping.
       I looked under the bike with a mirror, I removed the hugger, I
       removed the engine RH cover (which revealed the front
       sprocket...) but found no screw.
       I looked at the picture in owner manual page 3-18 but I can't
       figure where it is on the bike.
       Thanks for any help!!
       #Post#: 1065--------------------------------------------------
       Re: Where is located the screw for rear compression damping adju
       stement?
       By: mt01ash Date: August 22, 2020, 2:52 pm
       ---------------------------------------------------------
       their is a small hole in the swing arm forgot if it the right or
       left side its just before the brace on the swing arm you will
       find access to the adjustment screw in the hole
       #Post#: 1066--------------------------------------------------
       Re: Where is located the screw for rear compression damping adju
       stement?
       By: Claude Date: August 22, 2020, 3:22 pm
       ---------------------------------------------------------
       I found it! I found a picture on the net of the OEM rear shock
       showing exactly where the adjustment screw is. I followed that
       route on my shock and found the screw.
       Exactly where Ash wrote it is (thanks to you Ash!!), it is on a
       hole on the LH side of the swingarm.
       Both sag are now setted-up. I adjusted 4x damping slightly
       stiffer than OEM recommendations and I'm ready to road test it.
       Thanks again!
       *****************************************************