DIR Return Create A Forum - Home
---------------------------------------------------------
MT Owners Club
HTML https://mtowners.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: MT-01
*****************************************************
#Post#: 1021--------------------------------------------------
Tacho / Speedo wiring help
By: Dadog13 Date: June 30, 2020, 10:08 pm
---------------------------------------------------------
Hi all,
Does anyone know which wires feed the Speed signal and the rev
signal to the clock. Wiring goes to ÉCU first I think then I do
not which feed to the clock.
I am trying to fit a Motogadget clock.
Stumped.......
Cheers
#Post#: 1022--------------------------------------------------
Re: Tacho / Speedo wiring help
By: Max Headroom Date: July 6, 2020, 5:54 am
---------------------------------------------------------
Hi,
I've got one fitted and working but not 100% sure which wire I
cut into but think it was the Yellow/Blue. Your diagram looks to
be suggesting light green but that's just feeding the
immobiliser light. I can't check without taking the tank off and
opening up the wiring so maybe try Y/L first then Lg if it
doesn't work. Also it takes a bit of messing around to get it to
run right, it says it's dependent on number of sensor elements
and the manual suggest we have 2 but I had to keep increasing
the number to get a correct reading. Rev counter is easy just
take any NEGATIVE feed from a coil.
Worth the effort. Give me a shout if you have further problems.
#Post#: 1023--------------------------------------------------
Re: Tacho / Speedo wiring help
By: Dadog13 Date: July 6, 2020, 6:52 am
---------------------------------------------------------
MH, cheers for the reply. Must admit I’ve posted this plea for
help everywhere, FB etc. This is the 1 of the 2 out of I don’t
know How many that are serious and informative. Cheers.
My main worry is testing the feeds as the MotoG are
.........expensive and don’t want to let the smoke out.
But I do have a cheaper clock I will test on. Results I’ll let
you know, good or bad.
Cheers
Jon
#Post#: 1028--------------------------------------------------
Re: Tacho / Speedo wiring help
By: Max Headroom Date: July 7, 2020, 11:08 am
---------------------------------------------------------
No worries. If you get the Motogadget bug I've done the switches
and indicators so could guide you through that but it's not
cheap :)
#Post#: 1243--------------------------------------------------
Re: Tacho / Speedo wiring help
By: Dadog13 Date: April 16, 2021, 7:29 pm
---------------------------------------------------------
Hi MH,
been a while but you said if I have any further problems..... :)
Have been sorting out the MT slowly nearly done.
Another question about motogadget clock wiring, do you know
which is the engine oil pressure sensor and oil temperature
sensor wires for the warning lights from the original loom?
Cheers
#Post#: 1247--------------------------------------------------
Re: Tacho / Speedo wiring help
By: Danmt Date: April 17, 2021, 4:29 am
---------------------------------------------------------
The MT 01 engine does not have any oil pressure sensing system
at all. Not even a mute one that would feed into the computer.
Nothing.
#Post#: 1248--------------------------------------------------
Re: Tacho / Speedo wiring help
By: Dadog13 Date: April 18, 2021, 1:54 am
---------------------------------------------------------
It does have an engine trouble warning light and an engine
temperature sensor no. 28 & 45 on the wiring diagram.
I presumed they were linked somehow.
#Post#: 1249--------------------------------------------------
Re: Tacho / Speedo wiring help
By: Danmt Date: April 18, 2021, 3:54 am
---------------------------------------------------------
My son had a XJ600 some years ago, it only had a warning light
for oil level. I do not think the SR400 he has now has any oil
light at all.
Yamahas are weird.
*****************************************************