URI:
   DIR Return Create A Forum - Home
       ---------------------------------------------------------
       MT Owners Club
  HTML https://mtowners.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: MT-01
       *****************************************************
       #Post#: 900--------------------------------------------------
       Got the mod bug again :)
   DIR By: Max Headroom
       Date: October 18, 2019, 8:19 am
       ---------------------------------------------------------
       So I finally got started on stripping the bike down for a
       respray after my little prank with 15ltrs of petrol. All the
       back part of the frame paintwork etc is ruined so I felt pretty
       dejected until I saw this when I was researching my next
       project.
       [attach=1]
       I think this just looks amazing and got me thinking of combining
       an air scoop into the front of the tank in a complete cover
       rather than the add on bit. Hopefully getting smoother lines and
       a bit more radical look.
       So I'm about to get creative with 10kg of modelling clay :)
       #Post#: 902--------------------------------------------------
       Re: Got the mod bug again :)
   DIR By: Nikk
       Date: October 21, 2019, 3:54 am
       ---------------------------------------------------------
       Me like! Good luck
       #Post#: 904--------------------------------------------------
       Re: Got the mod bug again :)
   DIR By: gorilla
       Date: October 22, 2019, 11:58 am
       ---------------------------------------------------------
       Looking forward to seeing it  ;D
       #Post#: 921--------------------------------------------------
       Re: Got the mod bug again :)
   DIR By: omeo-mt01
       Date: November 6, 2019, 4:10 am
       ---------------------------------------------------------
       When I did my engine I moved all that stuff too as well as 43mm
       throttle bodies and intake manifold but managed to use standard
       fittings.
       A few months later and had ridden around, gone to the big smoke
       and had it run on a dyno, more riding at home then I lost
       license for a year.
       Because I live in the bush I thought I might sneak out for a
       little run a couple of km up the road.
       Rode about 3 km, turned round and started back. The rear felt
       like a flat tyre, it was sliding around on power off (steep hill
       ) and I thought, I gunna get stuck with suspended license if I
       stop so kept going. Just rolled up drive and into shed when
       engine stopped and I could then smell the petrol.
       One of those clever connectors they use had come undone and fuel
       had pumped all over the rear tyre giving the flat tyre
       feeling.It was sliding on petrol.
       It ran out just as pulled into shed. I had not connected it
       properly months before and yet it lasted through quite a bit of
       high speed stuff. On way back from the dyno run had taken it to
       6000 redline in top (223kmh). Still had 16 tooth on front then.
       Lucky like you were. And I never rode or drove anything again
       till license back.
       Good luck with your new project.
       BTW, happened to be looking at mt01 pics on net the other day
       and came across a custom one by Lazarus.
       EDIT, Ive responded to the wrong thread but you,ll work it out
       ;D
       #Post#: 922--------------------------------------------------
       Re: Got the mod bug again :)
   DIR By: Max Headroom
       Date: November 6, 2019, 5:07 am
       ---------------------------------------------------------
       Hi Graeme, In a way your chances of disaster were higher than
       mine! Sliding about on petrol, mind you I think I'd have rather
       had petrol on the wheel than on me :).
       The original Laz photos were what got me started, I just got a
       bit carried away! The clay modelling is going well, I'll post
       some photos when done.
       Oh yeah, wrong thread but who cares. Bet you're looking forward
       to the summer there.
       #Post#: 924--------------------------------------------------
       Re: Got the mod bug again :)
   DIR By: omeo-mt01
       Date: November 7, 2019, 2:22 am
       ---------------------------------------------------------
       Hi Max, for sure but just now its a bit wintry in southern
       Victoria. Am at Phillip Island doing level 3 today and level 4
       tomorrow with california superbike school.
       That weather you saw last week with that wind etc is happening
       again. Got most of today in ok, even had a dry track for 2
       sessions but tomorrow might not be so good. The MT does well, it
       keeps up pretty well with most bikes and is a constant source of
       wonder for the sportsbike riders. Overhauled an 1100 Tuono up
       the straight today.
       Sound wise its a real winner, many a comment made.
       It will be too hot quick enough though ;D
       #Post#: 926--------------------------------------------------
       Re: Got the mod bug again :)
   DIR By: DAB
       Date: November 8, 2019, 6:01 pm
       ---------------------------------------------------------
       --- Quote from: omeo-mt01 link ---
       >
       >
       > One of those clever connectors they use had come undone and
       fuel had pumped all over the rear tyre giving the flat tyre
       feeling.It was sliding on petrol.
       > I had not connected it properly months before and yet it
       lasted through quite a bit of high speed stuff.
       >
       --- End Quote ---
       Same happened to me.
       *****************************************************
       Page 1 of 1