DIR Return Create A Forum - Home
---------------------------------------------------------
Michigan Drifting
HTML https://michigandrifting.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Tech Talk
*****************************************************
#Post#: 611--------------------------------------------------
Re: SR20 Help
By: fogls Date: March 26, 2014, 9:35 pm
---------------------------------------------------------
Yeah that is what I am thinking. I have replaced everything
except the injector going to cylinder one. I did however swap
the injectors between cylinder one and two. Cylinder one also
has a brand new oem coil. I am figuring that I have over looked
something somewhere. Either that or I am getting too much fuel.
#Post#: 612--------------------------------------------------
Re: SR20 Help
By: fogls Date: March 26, 2014, 9:36 pm
---------------------------------------------------------
Thanks for the heads up Jake. On a side note would boost leak
show up on the boost gauge at all?
#Post#: 631--------------------------------------------------
Re: SR20 Help
By: fogls Date: March 31, 2014, 6:39 pm
---------------------------------------------------------
Well my new ecu has the led light in it to pull codes. The only
code I have is 13. Coolant temp sensor. So I will be replacing
that. I also pulled the valve cover and it looked like my cam
angle sensor was a little off. Reset it last night but I still
have to put it back together. I will update as soon as I get it
done. I did a bunch of other testing and it appeared that
cylinder one was sparking before fuel came in. Hence why I check
the cas. We will see where this gets me now.
#Post#: 653--------------------------------------------------
Re: SR20 Help
By: fogls Date: April 2, 2014, 11:52 pm
---------------------------------------------------------
Looks like I may have figured it out last night. A friend came
over and we were going to do another compression test on
cylinder one just to be sure. Compression was ridiculously high.
Looked down in the cylinder and there was a puddle of gas in the
cylinder. So somewhere between when I lost spark and trying to
diagnose that problem and when I swapped the injectors between
cylinders, the cylinder flooded and wasn't allowing the spark to
ignite. Got the gas out and the car started right up and ran
better than it had since I have owned. it. So next up will be
new plugs and cts and it looks like I will be ready to go.
Thanks for all the helpful info.
#Post#: 655--------------------------------------------------
Re: SR20 Help
By: tungm Date: April 3, 2014, 10:34 am
---------------------------------------------------------
Good to hear. Nice work!
*****************************************************
DIR Next Page