URI:
   DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Michigan Drifting
  HTML https://michigandrifting.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Classifieds
       *****************************************************
       #Post#: 41--------------------------------------------------
       Nissan 240SX Drift Car, Ford 5.0 supercharged or LS Ready Price 
       Drop!!
       By: Dirtracer11l Date: February 3, 2014, 7:45 pm
       ---------------------------------------------------------
       I'd love to sell this to someone in MI, price in negotiable,
       especially if you want to deal on some parts, if you're serious,
       cash in hand we can make a deal
       Selling entire drift car setup, everything I own and everything
       you need to go drifting.
       All prices are OBO, show up with cash and we can talk price,
       please don't make me offers without seeing the car.
       Not looking to part the car out further than this right now, may
       be able to negotiate price somewhat if you don't want spares,
       supercharger, wheels and tires ect.
       Entire operation (Everything Listed Below): $11,000
       Or, I'll break it up.
       Roller w/ spares: $5,000
       Ready for whatever engine and Trans you want. Started as a super
       clean 1992 Nissan 240SX, stripped to unibody and built up from
       there.
       8 pt cage Passed MDU tech without issue, built to formula D rule
       book
       Car is 100% rust free California car
       Extended front control arms
       Poly bushings all around
       Factory brakes, recently rebuild calipers, Hawk pads
       Stainless brake lines
       New ball joints all around
       Fuel Safe fuel cell with 255lph baffled In-tank setup (Not the
       one in the build pics)
       -8 Stainless feed line with -6 stainless return
       New inner and outer tie rods
       5-lug conversion
       PBM Max angle spindles
       Stripped factory wire harness (all lights work).
       Relocated Battery with Box
       Solid mount rear Subframe
       Tubed Front Fenders
       SPL Front Tension arms
       SPL Rear Tension arms
       PBM RUCA
       PBM Toe Links
       PBM MAX Competition coilovers
       Welded Q45 rear differential with Z32 TT axles and hubs (Big
       6-bolt)
       Full Autometer mechanical gauges with memory tach
       Autometer A/F gauge
       PBM Hydraulic Hand Brake
       2 Sparco Sprint Seats
       6 Ford OEM 17 X 9 Aluminum Wheels
       4 Steeda Ultra-Light 17 x 9 Aluminum Wheels
       25mm,32 mm, and 50mm wheel spacers
       Extra set Fender flares
       Spare Factory welded diff and axles
       Spare S14 5-lug hubs
       Simpson 5 point harnesses
       Kenda 245/40 R-17 Tires, 3 band new, several 50%
       Engine and Trans w/ Spares: Supercharged Ford 306 Pushrod V8
       $6,000.
       The engine in the build pics was just for moc-up
       Tuned and Dyno'd at Alternative Auto, made 367 Hp at the wheels,
       380 Ft-lbs Torque and over 300 ft-lbs at the wheels from 2700
       RPM - 6200 RPM, that was at 8 lbs boost @ max power, the short
       block will handle 600hp so there's plenty there for a ton more
       power.
       Fresh DSS Level 20 short block
       Edelbrock Performer aluminum heads
       Anderson Ford Forced Induction Cam shaft w/ matched springs
       Harland Sharp roller rockers
       Edelbrock Performer RPM Upper and lower intake
       70mm Throttle Body
       42 lb/hr Injectors with Pro-M 80mm MAF
       Vortech V3 Supercharger
       Billet steel flywheel
       Promotion Performance Custom Clutch
       Promotion Performance Stage three T-5 Trans
       Steeda Tri-Ax shifter
       Treadstone Intercooler
       Misc belts and engine parts
       Extra wire harness
       Ford V8 Swap: $800
       Everything needed to put a Ford pushrod 5.0 into an S13
       Custom Baffled oil pan
       Solid motor and trans mounts
       C&R aluminum Radiator
       Custom shorty headers with 2.5" to 3.5" exhaust
       Stripped engine wire harness
       RAM Hydraulic Throw-out bearing and Willwood Master Cylinder
       Custom 1 piece Driveshaft
       2 into 1 exhaust
       Power steering adapters and Lines
       This isn't some cobbled together project; I've been building
       race cars for almost 15 years. Car has been competitive in MDU
       for several years, qualified for several events including 2012
       and 2013 Street life Tour.
       More Pictures Here
  HTML http://s820.photobucket.com/user/dirtracer11l/library/240%20For%20Sale?sort=3&page=1
       #Post#: 44--------------------------------------------------
       Re: Nissan 240SX Drift Car, Ford 5.0 supercharged or LS Ready Pr
       ice Drop!!
       By: tungm Date: February 3, 2014, 8:08 pm
       ---------------------------------------------------------
       GLWS, sad to see you go buddy. I know you got that baby tho.
       #Post#: 52--------------------------------------------------
       Re: Nissan 240SX Drift Car, Ford 5.0 supercharged or LS Ready Pr
       ice Drop!!
       By: Dirtracer11l Date: February 4, 2014, 2:49 pm
       ---------------------------------------------------------
       I'm gonna miss all you guys, but I'll stop at an event from time
       to time.  I'm actually going to drive my cousin's car on the
       Dirt this summer.
       #Post#: 53--------------------------------------------------
       Re: Nissan 240SX Drift Car, Ford 5.0 supercharged or LS Ready Pr
       ice Drop!!
       By: tungm Date: February 4, 2014, 7:46 pm
       ---------------------------------------------------------
       i got a buddy at work who's really into dirt ovals... sounds
       $$$$$$$$$$$$$$$$$$$$$
       he said they blew 3 engines each worth $40,000.  :o
       #Post#: 163--------------------------------------------------
       Re: Nissan 240SX Drift Car, Ford 5.0 supercharged or LS Ready Pr
       ice Drop!!
       By: Dirtracer11l Date: February 18, 2014, 7:29 pm
       ---------------------------------------------------------
       Common guys, you know your not going to be ready for round 1,
       why build when you can just buy this!!!
       *****************************************************