DIR Return Create A Forum - Home
---------------------------------------------------------
Micro-Cap EDA Users
HTML https://mc12.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Micro-Cap 12 Discussion
*****************************************************
#Post#: 70--------------------------------------------------
Analog Library Bridge Rectifier Schematic Symbol
DIR By: Robert
Date: August 12, 2024, 9:49 am
---------------------------------------------------------
The schematic symbole for a GBU806 bridge rectifier is that of
simple diode.
This is the case for the entire series of those bridge
rectifiers.
The datasheet of the GBU806 can be found on the internet.
Any advice? - Thanks,
Robert
#Post#: 71--------------------------------------------------
Re: Analog Library Bridge Rectifier Schematic Symbol
DIR By: MC12
Date: August 13, 2024, 1:19 am
---------------------------------------------------------
That sounds very strange, in as much as a bridge rec has four
terminals whereas a diode has only two!
If this is for the purpose of drawing a circuit diagram, choose
another component which shows correctly as a bridge rec. If you
need to match diode characteristics for simulation, construct a
bridge rec out of individual diodes with the appropriate
characteristics.
#Post#: 72--------------------------------------------------
Re: Analog Library Bridge Rectifier Schematic Symbol
DIR By: Robert
Date: August 13, 2024, 8:12 am
---------------------------------------------------------
I did find a bridge rectifier in the Analog Library for
simulation with similar electric data as the one I want to use
in the circuit.
Thanks for writing.
Robert
#Post#: 73--------------------------------------------------
Re: Analog Library Bridge Rectifier Schematic Symbol
DIR By: MC12
Date: August 15, 2024, 4:58 pm
---------------------------------------------------------
I've had a quick look, and it seems to me an error has been made
adding the GBU806 to the component library. Perhaps
[member=6]Rohit[/member] can tell us how to fix it!
#Post#: 74--------------------------------------------------
Re: Analog Library Bridge Rectifier Schematic Symbol
DIR By: Rohit
Date: August 16, 2024, 8:52 am
---------------------------------------------------------
The manufacturer of the GBU806 has provided the spice model as
one diode of a bridge.
HTML https://www.diodes.com/productcollection/spicemodels/8336/Bridges.spice.txt
*SRC=GBU806;DI_GBU806;Diodes;Si; 600V 8.00A 3.00us Diodes
Inc. Bridge -- for one element
.MODEL DI_GBU806 D ( IS=17.8p RS=7.59m BV=600 IBV=5.00u
+ CJO=240p M=0.333 N=1.25 TT=4.32u )
And the authors of MC have made the device like so. You can just
use the 4 diodes and make a bridge. If you want to make it a
complete device (bridge configuration), make a subckt with a 4
of these in a bridge configuration, import it and assign symbol
of a bridge rectifier. I have made a lib file for this
component, use it as base to create other devices in this
series. *lib file for this complement is attached (component
name is slightly changed to avoid conflict).
#Post#: 75--------------------------------------------------
Re: Analog Library Bridge Rectifier Schematic Symbol
DIR By: MC12
Date: August 16, 2024, 11:08 am
---------------------------------------------------------
Great, thanks. :)
*****************************************************
Page 1 of 1