URI:
   DIR Return Create A Forum - Home
       ---------------------------------------------------------
       MakeApage Scrapbooking
  HTML https://makeapagescrapbooking.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: CYBER SCRAP WEEKEND - 20th-22nd August 2021
       *****************************************************
       #Post#: 364--------------------------------------------------
       Challenge FOUR : Blind Scrap
       By: Kylieh Date: August 12, 2021, 4:47 am
       ---------------------------------------------------------
       Challenge FOUR
       Blind Scrap or Scrapping Blind :
       Create a 12x12 Scrapbooking layout following the instructions
       given below.
       Keep in mind that, like the page map challenge its your
       interpretation of the instructions.
       Half the fun of this challenge is seeing what we all come up
       with OR how badly I give instructions!! haha Could go either
       way!
       Note : All measurements are in inches!
       What products you will need :
       1 sheet of 12x12 Cardstock – for the background.
       Assorted papperned papers
       simple embellishemnts –
       I have just fussy cut images from my papers and used a small
       amount of
       wood flourish/ chipboard.
       Double sided tape.
       What tools :
       12” cutter or your preferred Scrapbooking cutter
       A ruler if you want more than just apprimate measurements
       Edge Distressor or something to roughen the paper edges.
       Instructions :
       1. Use a sheet of 12x12 cardstock as your background. It will
       almost all be covered by patterned paper. Take a sheet of
       patterned paper, I used a solid coloured piece which coordinated
       with the other patterned papers in a collection (Scraps from my
       August Scrapbooking workshop!). Cut the solid piece down to
       5”x12”. Carefully tear the bottom edge of the short side (5”
       side), I just tore all along – about a ½” strip exposing the
       white paper core. Roughly curl the torn edge so it does not sit
       flat. Adhere this piece of patterned paper to the top of your
       cardstock background – ONLY add tape to the top and sides, we
       need to side the next layer underneath to create overlap.
       2.Cut another sheet of patterned paper, this time l used a
       coorindating floral piece. Cut 7 ¼”x12” and attach approximately
       ½” from the bottom. The top of your sheet will slide under the
       solid paper added previously. I then had a border strip of
       another contrasting paper that I have also added, sliding
       underneath the top sheet. The torn edge of the top sheet should
       over hang onto the border sheet which you just added.
       3.I have used a photo which has been cropped (Canon selfie
       print) it is approx 5 ¾”x4”. I have added a photo mat which is
       the same colour as the Cardstock I used for my background.  The
       photo mat is 4¼”x6¼”. Before adding the photo l cut and added
       two blocks of different patterned paper. The first block is
       5¼”x6” and l have distressed the edges. The second block is
       smaller and it is 4½”x6” and no distressing.
       4.Assemble the blocks, the largest going down first, adhere the
       first one to the top left hand corner of your layout, approx 1”
       from the top and 1½” from the left side edge. The second block
       over laps but is more left side orientated, approx 1¼” from the
       top of the page and approx ¾” from the left side edge. Balance
       your matted photo on top of the two blocks.
       5.I have added a banner which is tucked between the two blocks.
       The banner is 2”x3” and it hangs approx 1” in from the bottom
       left corner of the photo.
       6.The Layout title sits half on the banner and a small circle
       cut from my patterned paper that I tucked under the banner and
       blocks. Helps make my chipboard title more visible.
       7.Embellishments – I added a small strip of scalloped pattern
       paper of a darker colour under the photo and it sits over the
       top of the banner. I have fussy cut some flowers and leaves and
       tucked them in along the right hand edge of my photo along with
       a wooden butterfly, creating a cluster along that edge.
       I also added a tab which was cut from my papers and I added it
       along the top of my photo – top left with another hand cut
       circle of centre behind it.
       I have created a visual triangle with my tile and embellies.
       8.Done! Good Luck :)
       #Post#: 400--------------------------------------------------
       Re: Challenge FOUR : Blind Scrap
       By: Theresakamp Date: August 21, 2021, 5:12 am
       ---------------------------------------------------------
       Wow well done on these instructions will give it a go tomorrow
       #Post#: 403--------------------------------------------------
       Re: Challenge FOUR : Blind Scrap
       By: ButterZ Date: August 21, 2021, 8:14 am
       ---------------------------------------------------------
       Oh wow… this is a bit of a doozie .. might give this one a go….
       *****************************************************