DIR Return Create A Forum - Home
---------------------------------------------------------
EAGER BEAVER FORUM
HTML https://maamchristine.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: General Discussion
*****************************************************
#Post#: 2--------------------------------------------------
Soldering
By: MaamChristine Date: August 3, 2016, 7:14 pm
---------------------------------------------------------
[center]
HTML http://www.technologystudent.com/elec_flsh/revsold1.png
[font=comic sans ms]What are the common problem/s you
encountered during Soldering and how are you able to
surpassed?[/center]
#Post#: 7--------------------------------------------------
Re: Soldering
By: Viloria Date: August 13, 2016, 12:40 am
---------------------------------------------------------
The basic techniques is our problem. We lack knowledge on how to
solder. I was able to surpass it by asking some questions to the
one's how are highly experienced on doing it.
#Post#: 8--------------------------------------------------
Re: Soldering
By: De Guzman C Date: August 13, 2016, 4:02 am
---------------------------------------------------------
when the soldering lead is not melting and its not sticks in the
copper and also the soldering iron is not working
and then i ask MM what should i do and then she tells me so use
sand paper to make the soldering lead stick to the copper wire
and for my soldering iron she tells me that i have to plug it in
the socket (natanggal lang pala sa saksakan xD)
#Post#: 13--------------------------------------------------
Re: Soldering
By: JeremyAbergos Date: August 13, 2016, 6:04 am
---------------------------------------------------------
1st stripping or removing the insulator 2nd the led is not
melting because soldering gun is very low in watts
#Post#: 16--------------------------------------------------
Re: Soldering
By: Nicole Batrina Date: August 13, 2016, 11:13 am
---------------------------------------------------------
The led are not melting, it makes us to do slow work. I just do
it properly and buy new led and soldering iron :)
#Post#: 17--------------------------------------------------
Re: Soldering
By: Dingalan Date: August 13, 2016, 9:18 pm
---------------------------------------------------------
When the lead is not properly melted into the copper to make
them stick together and I asked Sir Fernando how is it done. And
do it over and over again until I succeed.
😁😁😁😁
#Post#: 22--------------------------------------------------
Re: Soldering
By: jasonOHMeter Date: August 13, 2016, 11:45 pm
---------------------------------------------------------
the common problems that i encountered when i'm doing soldering:
*the quality of the soldering led because its not good or fake,
its hard na dumikit ito sa copper wire.
*the size of copper wire. the bigger the wire the harder to
solder.
and either to surpass it u should examine the soldering led if
its have a good quality before buy it. Train yourself to in
soldering, to make u better.
#Post#: 23--------------------------------------------------
Re: Soldering
By: galapinargie12 Date: August 14, 2016, 5:15 am
---------------------------------------------------------
when use the soldering led the problems is not sticks in the
copper and also the soldering iron is not working
#Post#: 29--------------------------------------------------
Re: Soldering
By: michaelmalavega Date: August 14, 2016, 6:15 am
---------------------------------------------------------
When I'm soldering i always do mistakes buy putting so much
solder lead on the wires so i ask the teachers what to do, but i
cannot perfect it so i realize that the problem is in the
soldering iron when i change it I suddenly got better by
soldering wires.
#Post#: 31--------------------------------------------------
Re: Soldering
By: Lacar Date: August 14, 2016, 6:32 am
---------------------------------------------------------
for me I've encounter a problem when I put a lead its hard
becuase I have no idea for this situation but now I learned how
to put a lead on wire because of my experiences on soldering
*****************************************************
DIR Next Page