DIR Return Create A Forum - Home
---------------------------------------------------------
Lynx Wind Forum
HTML https://lynxwindforumhtml.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Steam Power
*****************************************************
#Post#: 984--------------------------------------------------
Re: Designing dual cylinder double action steam engine
By: burnit0017 Date: December 8, 2013, 6:41 pm
---------------------------------------------------------
Hi, I completed the scotch yoke that will drive the valves. For
version 1 I decided to use a simple valve configuration.
HTML http://npmccabe.tripod.com/runrschemat.jpg
[img]
HTML http://www.modelenginemaker.com/index.php?action=dlattach;topic=2804.0;attach=10891;image[/img]
HTML http://www.modelenginemaker.com/index.php?action=dlattach;topic=2804.0;attach=10891;image
[img]
HTML http://www.modelenginemaker.com/index.php?action=dlattach;topic=2804.0;attach=10893;image[/img]
HTML http://www.modelenginemaker.com/index.php?action=dlattach;topic=2804.0;attach=10893;image
[img]
HTML http://www.modelenginemaker.com/index.php?action=dlattach;topic=2804.0;attach=10895;image[/img]
HTML http://www.modelenginemaker.com/index.php?action=dlattach;topic=2804.0;attach=10895;image
[img]
HTML http://www.modelenginemaker.com/index.php?action=dlattach;topic=2804.0;attach=10897;image[/img]
HTML http://www.modelenginemaker.com/index.php?action=dlattach;topic=2804.0;attach=10897;image
#Post#: 988--------------------------------------------------
Re: Designing dual cylinder double action steam engine
By: crazyguy Date: December 9, 2013, 10:37 am
---------------------------------------------------------
cant see the pictures. other forum not approving new users in a
timley fashion.
#Post#: 997--------------------------------------------------
Re: Designing dual cylinder double action steam engine
By: burnit0017 Date: December 10, 2013, 6:52 am
---------------------------------------------------------
[img]
HTML http://www.anotherpower.com/board/index.php?action=dlattach;topic=869.0;attach=2783;image[/img]
Hi, just a basic photo showing the layout. I hope this solves
the viewing problem.
#Post#: 999--------------------------------------------------
Re: Designing dual cylinder double action steam engine
By: crazyguy Date: December 10, 2013, 9:00 am
---------------------------------------------------------
You are getting real good at this.
#Post#: 1082--------------------------------------------------
Re: Designing dual cylinder double action steam engine
By: burnit0017 Date: December 18, 2013, 12:19 am
---------------------------------------------------------
HTML http://www.modelenginemaker.com/index.php?action=dlattach;topic=2855.0;attach=11064
Hi, I found a nice boxer design, solves a lot of fabrication
problems.
HTML http://www.modelenginemaker.com/index.php/topic,2855.new.html#new
#Post#: 1084--------------------------------------------------
Re: Designing dual cylinder double action steam engine
By: crazyguy Date: December 18, 2013, 6:54 am
---------------------------------------------------------
cant get accepted by the site. Administrator must be on vacation
or something.
#Post#: 1085--------------------------------------------------
Re: Designing dual cylinder double action steam engine
By: lynx wind Date: December 18, 2013, 7:02 am
---------------------------------------------------------
@Burnit
You may want to right click and save images you like from other
forums and then resize to 50 kb and paste into this forum as a
picture. Otherwise we miss out on what you are trying to
communicate to us.
#Post#: 1088--------------------------------------------------
Re: Designing dual cylinder double action steam engine
By: burnit0017 Date: December 18, 2013, 8:20 am
---------------------------------------------------------
Hi, it is a PDF file. Basically it shows slots cut in to the
scotch yoke in a vertical direction. The slots eliminates the
need for all the parts to lined up on the center of the drive
shaft. I will work on trying to find a way to post info from the
other site. It has a lot of great fabrication info.
#Post#: 1089--------------------------------------------------
Re: Designing dual cylinder double action steam engine
By: burnit0017 Date: December 18, 2013, 8:29 am
---------------------------------------------------------
HTML http://www.anotherpower.com/board/index.php?action=dlattach;topic=869.0;attach=2796
HTML http://www.anotherpower.com/board/index.php?action=dlattach;topic=869.0;attach=2796
Testing
#Post#: 1112--------------------------------------------------
Re: Designing dual cylinder double action steam engine
By: burnit0017 Date: December 20, 2013, 4:35 pm
---------------------------------------------------------
[img]
HTML http://gallery.anotherpower.com/main.php?g2_view=core.DownloadItem&g2_itemId=24991&g2_serialNumber=2[/img]
[img]
HTML http://gallery.anotherpower.com/main.php?g2_view=core.DownloadItem&g2_itemId=24993&g2_serialNumber=2[/img]
[img]
HTML http://gallery.anotherpower.com/main.php?g2_view=core.DownloadItem&g2_itemId=24995&g2_serialNumber=2[/img]
Hi, testing photos viewing. I completed the cam and crank. I
have to fabricate one more scotch yoke and than I can start on
the pistons.
*****************************************************
DIR Previous Page
DIR Next Page