DIR Return Create A Forum - Home
---------------------------------------------------------
Lynx Wind Forum
HTML https://lynxwindforumhtml.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Steam Power
*****************************************************
#Post#: 2128--------------------------------------------------
Re: Designing dual cylinder double action steam engine
DIR By: crazyguy
Date: April 6, 2014, 3:53 pm
---------------------------------------------------------
.002" thats bad?
looks good to my old eyes. 8)
#Post#: 2130--------------------------------------------------
Re: Designing dual cylinder double action steam engine
DIR By: burnit0017
Date: April 6, 2014, 7:20 pm
---------------------------------------------------------
Hi, it does not seem like much, but you can still see the
wobble. Hoping for less than a 0.001. I can accurately measure
down to 0.0001. I re-centered the tail stock; it was off
centered; hoping better results on the next one.
#Post#: 2282--------------------------------------------------
Re: Designing dual cylinder double action steam engine
DIR By: crazyguy
Date: April 15, 2014, 8:47 pm
---------------------------------------------------------
Making electricity yet?
#Post#: 2283--------------------------------------------------
Re: Designing dual cylinder double action steam engine
DIR By: burnit0017
Date: April 15, 2014, 8:53 pm
---------------------------------------------------------
Hi, I found that the tail stock is also off centered vertically
>:( I have to purchased some shim material. Sorry for the
delay....
#Post#: 2294--------------------------------------------------
Re: Designing dual cylinder double action steam engine
DIR By: burnit0017
Date: April 16, 2014, 8:30 am
---------------------------------------------------------
[img]
HTML http://gallery.anotherpower.com/main.php?g2_view=core.DownloadItem&g2_itemId=26933&g2_serialNumber=1&g2_GALLERYSID=63cd3adec199ca45eaa8260d399348aa[/img]
Hi,just a photo of what I have been working on. Because the
lathe tailstock is not aligned I will have to re-make most of
the parts. I did find some videos on utube showing how to align
the tailstock, so I hope to have something running in a few
weeks.
#Post#: 2305--------------------------------------------------
Re: Designing dual cylinder double action steam engine
DIR By: crazyguy
Date: April 16, 2014, 4:58 pm
---------------------------------------------------------
Whoooeee !
Cool !
#Post#: 2560--------------------------------------------------
Re: Designing dual cylinder double action steam engine
DIR By: burnit0017
Date: May 4, 2014, 7:27 am
---------------------------------------------------------
Hi, sorry for the delay but my bandsaw keeps braking blades. >:(
I purchased a power hacksaw and now we are back on track. :) It
should be a few days. Thanks for the interest.
#Post#: 2581--------------------------------------------------
Re: Designing dual cylinder double action steam engine
DIR By: burnit0017
Date: May 6, 2014, 8:21 am
---------------------------------------------------------
HTML https://www.youtube.com/watch?v=7hKNqOT40LM
slow, but low operational cost 8)
#Post#: 2594--------------------------------------------------
Re: Designing dual cylinder double action steam engine
DIR By: burnit0017
Date: May 6, 2014, 5:38 pm
---------------------------------------------------------
Hi, can it cut 5 inch diameter bar stock? I am using the cut
time to clean my shop and do home maintenance ;D
*****************************************************
Page 12 of 12
DIR Previous Page