DIR Return Create A Forum - Home
---------------------------------------------------------
Lynx Wind Forum
HTML https://lynxwindforumhtml.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Electronics related to alternative Energy
*****************************************************
#Post#: 6320--------------------------------------------------
High Boost Controller
By: LynxWind Date: March 8, 2018, 12:31 pm
---------------------------------------------------------
I had a customer ask about getting 48 volts from the Seagull.
The Seagull is designed for 12 volt charging, however by adding
the Lynx Boost Controller it's easy to get charging at very low
wind speeds. But getting 48 volts is something different.
Rather than using fine wire to get 48 volts it is more practical
to change the boost.
Running each leg of the 3 phase to a separate rectifier allows
for significantly increasing the voltage. Each section acts
like a battery in series.
Here is the schematic - uses 1A diodes (and one high amp diode),
100uf electrolytic caps, 12 v micro relay, SPDT switch
#Post#: 6321--------------------------------------------------
Re: High Boost Controller
By: CG Date: March 9, 2018, 1:44 pm
---------------------------------------------------------
I have found a replacement drawing program for my Visio (that
only runs on Windows XP). So my new PC has windows 10.
I've been using it for several months and it's pretty good and
very easy to use.
I got it from the MIcrosoft store for about $30.
It's called Grapholite. You should try it. I use it all the time
every day.
#Post#: 6322--------------------------------------------------
Re: High Boost Controller
By: CG Date: March 10, 2018, 1:14 pm
---------------------------------------------------------
Here's an example of a drawing done with Grapholite.
I pasted the ada fruit perma-proto bread board onto the work
sheet then drew on top of it.
HTML https://drive.google.com/file/d/11Iw-vZMsd5ihWygBee98fFyjssbswy4O/view?usp=drivesdk
#Post#: 6344--------------------------------------------------
Re: High Boost Controller
By: Runasaga Date: May 29, 2018, 9:48 pm
---------------------------------------------------------
These data are very well suited to the needs I am looking for.
#Post#: 6345--------------------------------------------------
Re: High Boost Controller
By: Brunhilde Date: May 31, 2018, 10:21 pm
---------------------------------------------------------
Write details on the website so well accepted by us that it was
just one half.
*****************************************************