DIR Return Create A Forum - Home
---------------------------------------------------------
Lynx Wind Forum
HTML https://lynxwindforumhtml.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Wind Power
*****************************************************
#Post#: 3358--------------------------------------------------
plain an simple i have done my best!
By: happygolucky Date: June 16, 2014, 10:07 pm
---------------------------------------------------------
to all the builders..this is a good project an i believe it will
be a pleasant wind VAWT thanks for all the hints an tips..truth
is i need to put new set of wings on the old diy 175 kit...i
have it all built, bracing an saw a few minor things, i would
do differently... but for an experiment..i would say i did my
part an my best it not hard to build just darn frustrating..i
don't like to waste material.... with no real blue prints to go
by an if i had a good set of sut wings... well she would be up
an flying..you cant make something stick that will not!
i would say i have to throw in the towel an hope for the best
now..seen a few minor errors learned a whole lot.. an i have a
second st of rotor arms.. have noted the build inside.... an out
....from experience it has been fun a real head scratchier at
times an almost a few choice words almost...i will now let her
dry dry dry... the silicone that is.. an hope for the best..
hgl
#Post#: 3361--------------------------------------------------
Re: plain an simple i have done my best!
By: Otis Date: June 17, 2014, 2:22 am
---------------------------------------------------------
Optomistic and hopeful for your success.
#Post#: 3362--------------------------------------------------
Re: plain an simple i have done my best!
By: sut Date: June 17, 2014, 7:31 am
---------------------------------------------------------
I think it will be just fine you have done a great job !!! your
first build without a set of instruction that tell you exactly
how to do this! you have done very good job . do you have it
up on pole now ? I would and don't worry about the sut blades
they can be rebuilt, replaced if necessary (dont get rid of them
I would like to see them)
*****************************************************