DIR Return Create A Forum - Home
       ---------------------------------------------------------
       kycbradio
  HTML https://kycbradio.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: RCI 2950
       *****************************************************
       #Post#: 62--------------------------------------------------
       RCI 2950 Frequency Modification
   DIR By: kycbradio
       Date: October 5, 2018, 12:36 pm
       ---------------------------------------------------------
       RCI 2950 Frequency Modification
       1. Remove the case.  I *think* you can remove either the top
       cover or the bottom cover to get to the PC board with the
       jumpers.
       It will be a small PC board immediately behind the front panel.
       2. Locate "J2"  There will be a jumper on pins P3 and P4
       3. Remove this jumper to expand coverage to 26 MHz - 29.7 MHz.
       4. Move the jumper from P3-P4 to P1-P2 to expand coverage to 26
       MHz - 32 MHz.
       5. After moving (or removing) the jumper, press the CPU reset
       button located below J2
       NOTE:
       Operation between 30-32MHz may require retuning the VCO.
       *****************************************************
       Page 1 of 1