DIR Return Create A Forum - Home
       ---------------------------------------------------------
       kycbradio
  HTML https://kycbradio.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Sears Roadtalker
       *****************************************************
       #Post#: 61--------------------------------------------------
       Sears Roadtalker Clarifier Modification
   DIR By: kycbradio
       Date: October 5, 2018, 12:26 pm
       ---------------------------------------------------------
       Sears Roadtalker Clarifier Modification
       1. Find the green wire coming off the FINE TUNING control.
       Follow the wire to the pc board where it connects and unsolder
       it.
       2. Find the RED wire behind the meter display and solder it to
       that location(there is 8VDC there.
       3. Find the BLACK wire from the FINE TUNING control and unsolder
       it from the PCB.
       4. Solder this wire to PC GROUND .
       5. Find the PURPLE wire from the FINE TUNING control and
       unsolder that from the PC board.
       6. Solder this wire to the point on the PC board where R303 and
       the cathode, the end with the band around it! , of D301.
       
       This mod will give you about 3khz up/down off the "channel".
       If you move the clarifier and the radio "drops out" you will
       need to JUMP d301 and put the purple wire back to where it was.
       *****************************************************
       Page 1 of 1