DIR Return Create A Forum - Home
       ---------------------------------------------------------
       kycbradio
  HTML https://kycbradio.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Uniden Pro-810e
       *****************************************************
       #Post#: 39--------------------------------------------------
       Uniden Pro-810e  Clarifier modification
   DIR By: kycbradio
       Date: October 5, 2018, 8:43 am
       ---------------------------------------------------------
       Uniden Pro-810e  Clarifier modification
       1.  Cut D-25.
       2.  Cut D-32.
       3.  Cut both traces on the PCB going to the clarifier .
       4.  Solder one wire to PCB ground.
       5.  Solder a wire from the other cut trace to an 8 VDC source
       Note: 8 volts can be found on the trace that connects R-107 &
       R-106
       6.  This should give you 3 kc of slide.If more slide is wanted
       then jump D-24 with a piece of wire.(Sometimes it works)
       *****************************************************
       Page 1 of 1