DIR Return Create A Forum - Home
       ---------------------------------------------------------
       kycbradio
  HTML https://kycbradio.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Uniden PC-122
       *****************************************************
       #Post#: 38--------------------------------------------------
       Uniden PC-122 Clarifier modification
   DIR By: kycbradio
       Date: October 5, 2018, 8:38 am
       ---------------------------------------------------------
       Uniden PC-122 Clarifier modification
       1. Find the backside of the clarifier knob.
       2. Solder the bottom pin to GROUND. 3)Solder a wire to the top
       pin of the PCB.
       This pin should be cut loose from any traces going to it.
       4. Solder that wire to an 8VDC source.This can be found on the
       second jumper behind the PLL chip(IC-2).
       5. Cut D-25.
       *****************************************************
       Page 1 of 1