DIR Return Create A Forum - Home
       ---------------------------------------------------------
       kycbradio
  HTML https://kycbradio.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Cobra 2000 GTL
       *****************************************************
       #Post#: 36--------------------------------------------------
       Cobra 2000 GTL Clarifier  Modification
   DIR By: kycbradio
       Date: October 5, 2018, 6:13 am
       ---------------------------------------------------------
       Cobra 2000 GTL Clarifier  Modification
       1. Remove R44 and D52.
       2. Remove R174 and put a jumper in its place.
       3. Follow the YELLOW wire from the clarifier control to where it
       connects to the PC board and UNSOLDER it.
       4. Solder this YELLOW wire to the PC board ground.
       5. Follow the RED wire from the clarifier control to where it
       connects to the PC board and UNSOLDER it.
       6. Solder this RED wire to pin #3 of MB3756 regulator.
       7. Find the BROWN wire on the clarifier control UNSOLDER it, and
       tape it out of the way.
       No smoke? Then you must have about 1Kc slide up and 5Kc down!
       *****************************************************
       Page 1 of 1