DIR Return Create A Forum - Home
       ---------------------------------------------------------
       kycbradio
  HTML https://kycbradio.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Galaxy DX77HML Mods
       *****************************************************
       #Post#: 20--------------------------------------------------
       Galaxy DX77HML Extra Channels Modification
   DIR By: kycbradio
       Date: October 5, 2018, 4:12 am
       ---------------------------------------------------------
       Galaxy DX77HML Extra Channels Modification
       1.Remove the top of the case (The Part that does not have the
       speaker on it) and locate the wire (is usually green or red
       about 2  inches long)toward the front of the radio.
       2. Unsolder it from the ground and the two pins. After you have
       removed this wire make sure there is no solder connecting the
       two pins together.
       3. Find the connector toward the front right of the radio
       labeled 10K and reconnect this plug to the connector on the
       circuit board. (NOTE: This plug may already be attached when you
       get your radio.)
       4. All thats left to do is put the case back on and your done.
       *****************************************************
       Page 1 of 1