DIR Return Create A Forum - Home
       ---------------------------------------------------------
       kycbradio
  HTML https://kycbradio.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Galaxy 73HML
       *****************************************************
       #Post#: 113--------------------------------------------------
       Galaxy 73 HML Channel Expansion Modification
   DIR By: kycbradio
       Date: October 7, 2018, 9:38 pm
       ---------------------------------------------------------
       Galaxy 73 HML Channel Expansion Modification
       1. Remove bottom cover.
       2. On the left side of the radio (Front panel facing you) there
       will be a frequency counter (a tin-plated metal box).
       3. Remove the screw that holds this box to the chassis and move
       the frequency counter to one side.
       4. Located on the channel selector board you will see a small
       red jumper wire.
       5. Remove it, being sure not to over-heat the surface mount
       components.
       6. Lying nearby is a plug that is not plugged into anything.
       7. Plug it in to the empty socket on the channel selector board.
       8. Also lying nearby is a yellow wire and a brown wire, each cut
       into separate pieces and each covered with heat shrink on their
       ends.
       9. Solder the two yellow wires together and the two brown wires
       together.
       10. Use black electrical tape first to cover them and then cover
       the taped connections with heat shrink tubing.
       11. Re-mount the frequency counter to the chassis and the unit
       will now function on the cb band.
       *****************************************************
       Page 1 of 1