DIR Return Create A Forum - Home
---------------------------------------------------------
Ground Zero Gaming Forum
HTML https://kamcraft.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Player Created Topics
*****************************************************
#Post#: 8927--------------------------------------------------
Block stability has gone wonky
DIR By: Patchup
Date: July 4, 2016, 4:26 pm
---------------------------------------------------------
Hello,
Over the last few days, July 2nd thru 4th, blocks I place will
fall when I walk upon them.
This is wood at all improvement levels up to iron reinforced.
This happens even with just one block out from a support to the
ground.
Someone else mentioned the same problem in chat yesterday.
I am building on a prefab but I never had this problem before.
Anything I put down weeks ago is not falling.
I thought I would post this and see if it is more common than
just me or maybe I am missing something obvious.
#Post#: 8928--------------------------------------------------
Re: Block stability has gone wonky
DIR By: guest215
Date: July 4, 2016, 5:46 pm
---------------------------------------------------------
Let me know when online I'll check it out. usually it is user
error; if not, game flaws none of us can stop.
#Post#: 8929--------------------------------------------------
Re: Block stability has gone wonky
DIR By: DALGODA
Date: July 4, 2016, 10:28 pm
---------------------------------------------------------
same problem at my place frames that normally would not fall are
falling when walked on :'(
#Post#: 8932--------------------------------------------------
Re: Block stability has gone wonky
DIR By: AB42
Date: July 5, 2016, 9:01 pm
---------------------------------------------------------
Im having the same problem. Madman took a look same thing
happened when he tried it. Its a total waste of my time and
materials, so its just falling apart. When is 15???
Just wanted to add that it not only happened at my east
location, but also while laying frames at Bumbaloos . It has to
be a mechanical error , because its not just 1 place
#Post#: 8933--------------------------------------------------
Re: Block stability has gone wonky
DIR By: Ammit
Date: July 5, 2016, 10:57 pm
---------------------------------------------------------
i thought we had this problem before and it was some glitch?
Its deff odd.. blocks that were placed pre july are fine even if
destroyed and replaced, new placed ones fall when walked on
three cement blocks up and one over to one side falls
xx
x
x
_______
#Post#: 8936--------------------------------------------------
Re: Block stability has gone wonky
DIR By: MidnightStranger
Date: July 6, 2016, 10:14 am
---------------------------------------------------------
We had this same issue happen in the past era of Noob Hotel.
I believe we ended up doing a restore to a previous day (because
of some other non-related issue) and it also happened to fix the
falling blocks.
#Post#: 8937--------------------------------------------------
Re: Block stability has gone wonky
DIR By: guest215
Date: July 6, 2016, 1:12 pm
---------------------------------------------------------
I deleted quite a few regions it seemed no one was in
anymore/using to see if this helps.
Took about 2 hours; I'm trying to avoid a new seed until A15.
#Post#: 8938--------------------------------------------------
Re: Block stability has gone wonky
DIR By: supermarioxc
Date: July 6, 2016, 1:47 pm
---------------------------------------------------------
I had the same problem a couple days ago in the South but if I
had a second block under the one I walked in it would not fall.
But I tested it last night in the north and it seemed to be
working again in my base.
#Post#: 8939--------------------------------------------------
Re: Block stability has gone wonky
DIR By: Patchup
Date: July 6, 2016, 8:39 pm
---------------------------------------------------------
That seems to be the solution.
I can now walk on blocks I just placed without them falling.
Thank you, H0tR0d.
#Post#: 8941--------------------------------------------------
Re: Block stability has gone wonky
DIR By: Madman
Date: July 7, 2016, 9:22 am
---------------------------------------------------------
--- Quote from: h0tr0d link ---
>
> I deleted quite a few regions it seemed no one was in
anymore/using to see if this helps.
>
> Took about 2 hours; I'm trying to avoid a new seed until A15.
>
--- End Quote ---
I tried repairing damaged blocks and missing terrain under
AB42's base but was unable to fix her problem. I had a similar
but much smaller issue at my base as well. I'll have to take a
look tonight and see if that did the trick. I never would have
thought to delete regions. Good thinking h0tr0d! :)
*****************************************************
Page 1 of 5
DIR Next Page