DIR Return Create A Forum - Home
---------------------------------------------------------
Jason Moyle Racing
HTML https://jasonmoyleracing.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: TRANSMISSION
*****************************************************
#Post#: 581--------------------------------------------------
Inner 108mm cv's
By: Robin_16v Date: November 8, 2012, 3:01 pm
---------------------------------------------------------
Hello all,
Im looking for stronger inner and outer cv's for my 02a box.
Outer stronger cv's are found on the audi 200 model i thought?
But where do i get the 108mm flanges and cv joints from? bmw?
#Post#: 603--------------------------------------------------
Re: Inner 108mm cv's
By: Robin_16v Date: December 14, 2012, 11:37 am
---------------------------------------------------------
Custom flanges, inner bmw, outer audi 200, for the rally/cross
boys
#Post#: 735--------------------------------------------------
Re: Inner 108mm cv's
By: freeb85 Date: January 24, 2013, 6:17 pm
---------------------------------------------------------
hi did later mk3 and early mk4 use 108mm driveshaft parts.cheers
paul
#Post#: 737--------------------------------------------------
Re: Inner 108mm cv's
By: JMR Date: January 25, 2013, 4:46 am
---------------------------------------------------------
Not something I've looked at...I'm sure the collective will come
up with something. Who fancies a project listing all the drive
shaft options with various output sizes, gearbox types
etc...starting with the 020 and working through?
#Post#: 739--------------------------------------------------
Re: Inner 108mm cv's
By: Robin_16v Date: January 25, 2013, 5:33 am
---------------------------------------------------------
I now use 02a box, I use std 100mm CV inner joints and outer 16v
mk2 golf. The wheel side needs to be modded to fit. Inner i
would replace them for 108mm when the season gets underway. I
have been told there be found on the transporter mk4, you got 2
types, big spline and smale spline, smale spline is the same
that's used on the mk1-mk2 golfs. So that would fit, maybe you
got some machine work needs to be done on the driveshaft to
clear the circlip. Also the big flanges could be used from the
transporter
*****************************************************