DIR Return Create A Forum - Home
---------------------------------------------------------
Jason Moyle Racing
HTML https://jasonmoyleracing.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: ENGINES
*****************************************************
#Post#: 1588--------------------------------------------------
3 angle valve seats , and the cutting of.
By: Tristan Date: January 22, 2014, 2:54 pm
---------------------------------------------------------
Folks , thinking of buying tools for cutting 3 angle seats ,
mostly due to the lack of people doing it here! Not for business
purposes , just for myself . Firstly , how much better on road
cars with fast road cams are they , and second , who sells the
stuff for doing them? I don't have much specialist stuff , just
a Peg 10 grinder with stones.
#Post#: 1589--------------------------------------------------
Re: 3 angle valve seats , and the cutting of.
By: mitlom Date: January 22, 2014, 3:57 pm
---------------------------------------------------------
Hiya Tris,
Supposedly the best kit you can buy is Serdi, however this type
of kit is very expensive!
HTML http://www.serdi.co.uk/serdi2/portal/main/?Section=30%20Machinery&SubSect=20
I have used Neway valve seat cutting tools in the past, when I
worked for a race engine builder, and good results can be
achieved using these with practice and patience ;)
HTML http://international-tool.com/Neway-Valve
Hope this is of some help :)
#Post#: 1590--------------------------------------------------
Re: 3 angle valve seats , and the cutting of.
By: Tristan Date: January 22, 2014, 4:22 pm
---------------------------------------------------------
thanks Tim!
#Post#: 1596--------------------------------------------------
Re: 3 angle valve seats , and the cutting of.
By: JMR Date: January 25, 2014, 3:17 pm
---------------------------------------------------------
I think Serdi do a small bench unit...still around 3k tho...the
big boy is 18-20k.
#Post#: 1604--------------------------------------------------
Re: 3 angle valve seats , and the cutting of.
By: Tristan Date: January 27, 2014, 5:09 pm
---------------------------------------------------------
3 k?? yowza..... I thought I remembered Dave walker doing 'em by
hand with a Serdi Micro?
#Post#: 2219--------------------------------------------------
Re: 3 angle valve seats , and the cutting of.
By: Ramasikan Date: May 9, 2017, 4:54 am
---------------------------------------------------------
I do not think so, and have a more exotic idea.
*****************************************************