DIR Return Create A Forum - Home
       ---------------------------------------------------------
       input-inc
  HTML https://inputinc.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Questions and Answers
       *****************************************************
       #Post#: 135--------------------------------------------------
       Fabco cylinder+ linear actuator
       By: robotical Date: June 14, 2014, 6:02 pm
       ---------------------------------------------------------
       Hi, Terry and team. Is it possible to have the model of Fabco
       cylinder (old and replacement). I didn't understand the correct
       measure for the gimbal of the neck in the video and I'm puzzle
       with  it. I found a reference , I don't know if it's correct:
       J5XMR 1/4 shaft 1 1/2 inch travel.
       About linear actuator, the lower torso has a 8 inch stroke. How
       much inch is the upper torso, 3 inch?
       Did Firgelli is a good choice for the upper torso. difficult to
       find IEI in Belgium :
  HTML http://www.robotshop.com/media/files/pdf/firgelli-4-stroke-150-linear-actuator-spec.pdf
       so sorry for my bad english,
       alain
       pictures are post some times ago on your facebook;)  Is it
       possible to order some piece like gear drive, some piece
       difficult to make by hand
       #Post#: 136--------------------------------------------------
       Re: Fabco cylinder+ linear actuator
       By: alfaster78 Date: June 18, 2014, 3:19 am
       ---------------------------------------------------------
       Hi! If you want to build the full size J5 replica you need
       Fabco-air pancake K-5-X cylinders. If your J5 size biger or
       smaller then you need to measure the real distance between neck
       and head plate and choose any else.
       *****************************************************