DIR Return Create A Forum - Home
---------------------------------------------------------
Gadget Geeks
HTML https://gadgetgeeks.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Modding Section
*****************************************************
#Post#: 24--------------------------------------------------
How to: Hack UDA with custom installserver and Phoenix Flashing
Guide combined
By: abhitheracer Date: October 24, 2011, 5:52 am
---------------------------------------------------------
[center]Hack UDA with custom installserver and Phoenix Flashing
Guide[/center]
Credits: f33nix
You will need the following:
PSS_2011.24.002.46258
HTML https://www.rapidshare.com/#!download|97tl2|3454019792|PSS_2011.24.002.46258.exe|104438|R~ACA26F14110CC110A8F073C88568C78B|0|0
NaviFirm +
HTML http://www.cpkb.org/wiki/Navifirm
NokiaCooker
HTML http://www.symbian-toys.com/nokiacooker.aspx
Hacked Installserver
HTML http://symbian-coderus.blogspot.com/2010/11/installserver-for-s3.html
Optional - Sklchan's S3 Mods
HTML http://forum.gizmolord.com/modding-section-62/123042011-04-1212305new-s3-multiple-mods-v7-00-(no-hacked-phone-needed)-by-sklch/msg1042/#new
Step 1. Follow then guide.
Step 2. Then install your hacked firmware with Phoenix.
Step 3. This is optional - load sklchan's N8 mods.
We should give thanks to the creators of the various programs as
without them none of this would be possible.
________________________________________________________________
________________________
Step 1. Download firmware files
(This is based upon my phone and location, YOURS will be
different!!!)
[img width=692
height=420]
HTML https://sites.google.com/site/f33nixfoto/1.0.png[/img]
You need to download the NAVIFIRM program from
HTML http://cpkb.org/wiki/Navifirm
HTML http://cpkb.org/wiki/Navifirm
Extract and run the program (does not need to be installed)
The program needs to have access to the internet so make sure
you allow it through your firewall.
Do the steps in order.
Step 1.1 Select Nokia N8
Step 1.2 Select Latest Release
Step 1.3 Select YOUR region
Step 1.4 Remove the tick to Parse VPL or you will not
download all the files that you may need
Step 1.5 Press Mark All
Step 1.6 Download your files
After a few minutes (hours depending on your internet speed) you
should end up with your firmware files downloaded.
[img width=770
height=417]
HTML https://sites.google.com/site/f33nixfoto/1.1.png[/img]
Step 2: Download the latest Nokia Cooker
HTML http://www.symbian-toys.com/nokiacooker.aspx
HTML http://www.symbian-toys.com/nokiacooker.aspx
Load up Nokia Cooker and find where you downloaded your firmware
and open up the UDA file. Note it may take a minute to load!
(NOTE THAT THIS PICTURE IS AN OLD FIRMWARE – USE NEW UDA FROM
YOURS)
[img width=700
height=420]
HTML https://sites.google.com/site/f33nixfoto/2.0.png[/img]
Locate the folder in the system called /Sys/Bin and this is
where you need to drag and drop your hacked installserver to.
[img width=653
height=420]
HTML https://sites.google.com/site/f33nixfoto/2.1.png[/img]
Then when you save it will create one backup and it will also
create the modified UDA.
You can delete the backup from your system or move the original
UDA to another location, either way you do not need it.
Step 3. Now to bring it all together
We have the firmware ready to flash with Phoenix.
Before we plug in the USB cable or load the Phoenix flasher we
need to copy the firmware files so the Phoenix program can find
them all.
Copy the whole "RM-596" folder to "C:\Program Files
(x86)\Nokia\Phoenix\Products" or the "Products" folder if your
program is installed somewhere else.
So it should now be "C:\Program Files
(x86)\Nokia\Phoenix\Products\RM-596" where your files are
installed.
[img width=770
height=338]
HTML https://sites.google.com/site/f33nixfoto/3.0.png[/img]
Step 4. Now load up the Phoenix program with the phone connected
and turned on.
Select USB1 from the drop down box
(NOTE THAT YOURS MAY BE USB2/3 ETC!)
[img width=770
height=420]
HTML https://sites.google.com/site/f33nixfoto/4.0.png[/img]
Now Scan for the Phone
HTML https://sites.google.com/site/f33nixfoto/4.1.png
Verify that the boxes have now changed.
[img width=770
height=420]
HTML https://sites.google.com/site/f33nixfoto/4.2.png[/img]
Now that the Phone is identified correctly we now need to flash
the firmware.
HTML https://sites.google.com/site/f33nixfoto/4.3.png
Now we need to tell the program where the firmware files are so
that it can load them.
[img width=770
height=420]
HTML https://sites.google.com/site/f33nixfoto/4.4.png[/img]
Manually Select the firmware that you want to flash with.
[img width=441
height=420]
HTML https://sites.google.com/site/f33nixfoto/4.5.png[/img]
Then press OK to bring you back to the options screen to make
some more changes…
[img width=770
height=420]
HTML https://sites.google.com/site/f33nixfoto/4.6.png[/img]
Press the Options button to make advanced changes to the Flash
settings.
[img width=509
height=420]
HTML https://sites.google.com/site/f33nixfoto/4.7.png[/img]
If we double click on the highlighted file or select Edit then
we can change an option to make the custom UDA file MANDATORY!
HTML https://sites.google.com/site/f33nixfoto/4.8.png
Repeat this for the Mass memory file as well so we end up with
the changes highlighted below.
[img width=509
height=420]
HTML https://sites.google.com/site/f33nixfoto/4.9.png[/img]
Now press OK button at the bottom to save the changes.
VERIFY that you have the following screen so you do not make any
mistakes.
Check 1 – USB1 – RM-596
Check 2 – Phone and current firmware installed
Check 3 – New firmware files that will be installed
All 3 then click on “Refurbish”
[img width=770
height=420]
HTML https://sites.google.com/site/f33nixfoto/4.10.png[/img]
The beginning of the flashing procedure…
(PICTURE IS OLD FIRMWARE BUT PROCESS THE SAME)
[img width=346
height=420]
HTML https://sites.google.com/site/f33nixfoto/4.11.png[/img]
…a bit further on
[img width=343
height=420]
HTML https://sites.google.com/site/f33nixfoto/4.12.png[/img]
After a few minutes your phone should display a message about
being complete.
I have included a copy of my log so you know what to look for…
Flashing started
Creating product data items list
Product data items list created
Backup not required
Started product mode change
Product mode change complete
Doing factorysets
Factorysets complete
Flashing phone
Initializing
Verifying communication to device...
Scanning image files...
Loading secondary boot code: 15168 bytes
Secondary boot loaded
Loading update server code: 722517 bytes
Update server loaded
Partitioning....
Partitioning complete
Erasing....
Erasing complete
Asic CMT: Start programming 230079 KB...
Asic CMT: Programming data sent: 0%
Asic CMT: Programming data sent: 10%
Asic CMT: Programming data sent: 20%
Asic CMT: Programming data sent: 30%
Asic CMT: Programming data sent: 40%
Asic CMT: Programming data sent: 50%
Asic CMT: Programming data sent: 60%
Asic CMT: Programming data sent: 70%
Asic CMT: Programming data sent: 80%
Asic CMT: Programming data sent: 90%
Asic CMT: Programming data sent: 100%
Programming complete
WARNING: Asic CMT: NAND status reported bad blocks
<---Ignore this error!
Asic CMT: programming succeeded
Asic CMT: Verifying communication to device...
Phone flashing completed. Waiting for phone to boot up
Bootup successful
Verifying communication to product (before flash finalizing)
Communication verified
Product code changed
Loading default data to phone
Loading default data to phone
Getting Data Package
Reading product state
Starting backup/restore sub-procedure: data item pre-delay
data item pre-delay
data item pre-delay
Sub-procedure completed: Succeeded., result code: 0
Starting to backup/restore data item: ProductProfile, version:
1.1
Data Item backup/restore completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item post-delay
data item post-delay
data item post-delay
Sub-procedure completed: Succeeded., result code: 0
Backup/restore result: 0 out of 1 items were not backed up
Default data loading complete
Stopping all operations, returning phone to default mode
All operations completed
Product flashing succeeded.
AGAIN CREDITS TO f33nix
Click Here
HTML http://www.mediafire.com/?h18htww15axf0pe
*****************************************************