DIR Return Create A Forum - Home
---------------------------------------------------------
fftty139
HTML https://fftty139.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: General Discussion
*****************************************************
#Post#: 10--------------------------------------------------
SC Fast Connector manufacturers
DIR By: fftty139
Date: December 10, 2018, 8:58 pm
---------------------------------------------------------
Description
SC Fiber Optic Fast Connector designed for FTTH is a new
generation of fiber connector used in assembly. It can provide
Open flow and Pre-cast type of products, whose optical and
mechanical specification meets the standard optical fiber
connector.
It is designed for high quality and high efficiency for
installation the structure of crimping position is a unique
design, and need not gluing, polishing neither any consumables.
Adopting fiber pre-installed structure, and convenient for field
installation.
Technical specification
ItemParameter
Cable Scope3.0 x 2.0 mm Bow-type Drop Cable
Fiber Diameter125μm ( 652 & 657 )
Coating Diameter250μm
ModeSM
Operation Timeabout 15s(exclude fiber presetting)
Insertion Loss≤ 0.25dB(1310nm & 1550nm)
Return Loss≤ -45dB
Success Rate>98%
Reusable Times>10 times
Tensile Strength>5 N
Tighten Strength of Coating>10 N
Temperature-40~+85°C
On-line Tensile Strength Test (20 N) IL ≤ 0.3dB
Mechanical Durability(500 times) IL ≤ 0.3dB
Drop Test(4m concrete floor, once each direction, three times
total) IL ≤ 0.3dB
Field assembly procedure :SC Fast Connector manufacturers
website:
HTML http://www.simpleoptic.net/fiber-optic-fast-connector/sc-fast-connector/
*****************************************************
Page 1 of 1