DIR Return Create A Forum - Home
---------------------------------------------------------
CycleKarts GB
HTML https://cyclekartsgb.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Tech Forum
*****************************************************
#Post#: 7445--------------------------------------------------
Honda ANF 125 wheels.
By: Moogie38 Date: August 18, 2022, 3:21 pm
---------------------------------------------------------
Is anyone using the ANF wheels ?
Would it be possible to put the bearings where the oil seal was
or would the housing not be strong enough ? Thinking that by
putting the bearings further apart it would put less stress on
the centre of the hub and keep the wheel steadier. You could fit
25 x 37 x 10 bearings.
#Post#: 7447--------------------------------------------------
Re: Honda ANF 125 wheels.
By: chrisenamels Date: August 18, 2022, 4:33 pm
---------------------------------------------------------
I've got some ANF125 front wheels, but they're odd ones out
regarding bearings, fronts are 32mm both sides, rears are 37mm
one side and 32mm the other. The fronts are quite good as the
bearings are available in 17mm, 20mm, and 25mm bore, I'll
probably press the bearings all the way in to the seats. There's
probably enough width to fit two bearings each side given the
width of the bearings, tabulation attached.
#Post#: 7448--------------------------------------------------
Re: Honda ANF 125 wheels.
By: Moogie38 Date: August 18, 2022, 4:48 pm
---------------------------------------------------------
Thanks Chris.
Noel.
*****************************************************