DIR Return Create A Forum - Home
       ---------------------------------------------------------
       CycleKarts GB
  HTML https://cyclekartsgb.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Tech Forum
       *****************************************************
       #Post#: 6897--------------------------------------------------
       Number of teeth on sprockets?
       By: BLZeebub Date: May 19, 2022, 2:05 pm
       ---------------------------------------------------------
       Hi,
       Looking to tap into people's knowledge,  what size/ number of
       teeth are you running on your engine and axle sprockets?
       My logic is that go-karts have significantly smaller diameter
       tyres, than you would see on a CycleKart,  therefore different
       sizes will be required.
       Thanks in advance , Jon.
       #Post#: 6898--------------------------------------------------
       Re: Number of teeth on sprockets?
       By: RhysN Date: May 19, 2022, 2:28 pm
       ---------------------------------------------------------
       This comes back to what you are intending to use as a clutch
       system.
       Also chain size as per the earlier posts.
       personally I only use torque convertors, and aim for a ratio of
       around 1:6.5 or somewhere near.
       others use just a clutch. Of those I have zero knowledge of what
       works well.
       *****************************************************