DIR Return Create A Forum - Home
---------------------------------------------------------
CycleKarts GB
HTML https://cyclekartsgb.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: For sale and wanted
*****************************************************
#Post#: 6165--------------------------------------------------
Wanted - 15T 219 chain sprocket.
By: Glynn Date: March 27, 2022, 1:52 pm
---------------------------------------------------------
Does anyone have a spare 15T 219 chain sprocket with 5/8” bore
for use with torque converter. They were supplied by Gemini
Karts but they re currently out of stock.
#Post#: 6166--------------------------------------------------
Re: Wanted - 15T 219 chain sprocket.
By: sylvaman Date: March 27, 2022, 2:14 pm
---------------------------------------------------------
Hi Glynn , Don't think there's many of us using 219 . Did
Gemini say when back in stock ?
Chris L
#Post#: 6196--------------------------------------------------
Re: Wanted - 15T 219 chain sprocket.
By: Glynn Date: March 31, 2022, 12:32 pm
---------------------------------------------------------
Hello Chris,
Sorry for the slow response, had rather a lot on over the last
week. I spoke to Chris at Gemini and he tried to find me one
but drew a blank. Then he said he would try and get some more
cut. I don’t hold out much hope so I will have to make one !!
Glynn
#Post#: 6197--------------------------------------------------
Re: Wanted - 15T 219 chain sprocket.
By: sylvaman Date: March 31, 2022, 3:27 pm
---------------------------------------------------------
That's ok Glynn. I have remembered and found where i recorded
the details . The 219 front sprocket 15t that Gemini sell; is
made by TALON Engineering , local to us !
Part number on sprocket is TGS171, which i assume is TALON part
nunber.
Don't know if you can buy direct or go through outlets. Hope
this helps.
Chris L
#Post#: 6198--------------------------------------------------
Re: Wanted - 15T 219 chain sprocket.
By: Glynn Date: April 1, 2022, 2:33 am
---------------------------------------------------------
Hi Chris,
Just had a reply from Talon. This part is made to special
order, price starts at £120 +vat
#Post#: 6199--------------------------------------------------
Re: Wanted - 15T 219 chain sprocket.
By: TheGiantTribble Date: April 1, 2022, 3:27 am
---------------------------------------------------------
How much!!! Yikes
Bit of a long shot but you could try RS components UK
They have a huge list of sprockets, sorry at work so cant see if
they have your exact one.
#Post#: 6200--------------------------------------------------
Re: Wanted - 15T 219 chain sprocket.
By: chrisenamels Date: April 1, 2022, 3:39 am
---------------------------------------------------------
You could try a transmission company in your area, it's only a
5/8 bore sprocket with a keyway as far as I know, my local one
is
HTML http://www.combidrive.com/.
#Post#: 6203--------------------------------------------------
Re: Wanted - 15T 219 chain sprocket.
By: Glynn Date: April 1, 2022, 7:15 am
---------------------------------------------------------
So 219 pitch is 7.774mm. The nearest standard chain ( 05B-1 )
is 8mm pitch which is 10 thou more. I'm hoping that on a 15
tooth sprocket that will not be significant, any way as I can
get a sprocket for £5 on ebay it's worth a try. If that doesn't
work I think I'll change the whole lot to 05B-1.
#Post#: 6204--------------------------------------------------
Re: Wanted - 15T 219 chain sprocket.
By: sylvaman Date: April 1, 2022, 9:44 am
---------------------------------------------------------
PM sent Glynn
#Post#: 6258--------------------------------------------------
Re: Wanted - 15T 219 chain sprocket.
By: Glynn Date: April 5, 2022, 5:49 am
---------------------------------------------------------
Thanks Chris.
Well the 05B-1 sprocket doesn't work. The pitch, although very
close, causes the chain to bind. It is also much thinner than
the 219 tooth. I'm sure I can make a sprocket. Any engineers
out there with milling machine and dividing head ? I have a
drawing.
*****************************************************
DIR Next Page