DIR Return Create A Forum - Home
---------------------------------------------------------
CycleKarts GB
HTML https://cyclekartsgb.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Where to get stuff
*****************************************************
#Post#: 5776--------------------------------------------------
Rear Hubs
By: jim Date: March 6, 2022, 12:59 am
---------------------------------------------------------
Hopefully this link to ebay will work and show the Hubs I like
which have two clamp bolts and two grub screws on top of the
key. They should help the key from falling out and provide a bit
more grip to stop the hub from sliding along the
axle.
HTML https://www.ebay.co.uk/itm/255107927774?hash=item3b659e0ede:g:9c4AAOSw5ZJb0ZhS
These hubs fit the plates I made for the pit bike wheels from
fun bikes.
#Post#: 5798--------------------------------------------------
Re: Rear Hubs
By: Tinworm Date: March 6, 2022, 3:58 pm
---------------------------------------------------------
Thanks Jim
Really appreciated all your advice about wheels yesterday
#Post#: 5883--------------------------------------------------
Re: Rear Hubs
By: sylvaman Date: March 10, 2022, 10:57 am
---------------------------------------------------------
Nice looking Hubs Jim. What have you made your adapter plates
out of ; Ally or steel.
Wondering how they compare to the Gemini steel adapter plates.
Chris L
#Post#: 5887--------------------------------------------------
Re: Rear Hubs
By: jim Date: March 10, 2022, 11:19 am
---------------------------------------------------------
Cheers Chris, I have made them from both, the ali ones were a
bit thicker. The ali ones looked nicer because you have the
width to turn some nice curves in. Gemini plates are 4mm and
with removing the lip are nice and light. The one I brought to
the meeting was 6mm with just over 2mm removed from the side. A
bit heavier but the load is spread more.
#Post#: 5922--------------------------------------------------
Re: Rear Hubs
By: Tinworm Date: March 12, 2022, 3:33 pm
---------------------------------------------------------
Hi Jim
I now have my wheel and my hubs and definitely would like some
of your adapter plates, please.
The wheel have those raised bits. I will measure and get back to
you.
-Pete
*****************************************************