DIR Return Create A Forum - Home
---------------------------------------------------------
CycleKarts GB
HTML https://cyclekartsgb.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Off Topic
*****************************************************
#Post#: 1992--------------------------------------------------
Helping the builders who have yet to start
DIR By: RhysN
Date: March 15, 2020, 7:55 am
---------------------------------------------------------
Right now, as I write this there are 31 guests on line.
Obviously that means there is a vast untapped number of folks
who are showing interest.
On facebook I posted asking why those who had not started are
yet to do so.
Clearly, with only about half a dozen responses, the reasons are
not clear, but I am very keen to help folks into these
incredible creations.
To that end, I suggest that perhaps we establish a "buddy
system" where folks can feel they have some place to go to ask
the questions they may be reluctant to ask.
There is only one stupid question, the one you never asked.
I don't know it all, for one thing I don't weld, but I am now
building my eighth cyclekart, hopefully I have learned a bit
along the way!
Please folks, don't be shy, ask for help, anything is valid,
either on this forum, or message.
#Post#: 1994--------------------------------------------------
Re: Helping the builders who have yet to start
DIR By: chrisenamels
Date: March 15, 2020, 12:27 pm
---------------------------------------------------------
Though I'm on the fringe geographically, I'm only too happy to
share what knowledge I have to help anyone who needs it. If
there is anyone in South Wales who needs direct help then I'm
quite happy to do that too.
#Post#: 1995--------------------------------------------------
Re: Helping the builders who have yet to start
DIR By: StefanN
Date: March 16, 2020, 2:39 am
---------------------------------------------------------
I’m happy to offer practical help to builders in the
Surrey/Berkshire/Hampshire area.
#Post#: 2002--------------------------------------------------
Re: Helping the builders who have yet to start
DIR By: ChrisS
Date: March 17, 2020, 12:38 pm
---------------------------------------------------------
Absolutely, me too! Kent / East Sussex.
#Post#: 2007--------------------------------------------------
Re: Helping the builders who have yet to start
DIR By: TheGiantTribble
Date: March 20, 2020, 7:25 am
---------------------------------------------------------
Me as well for, Essex and Suffolk.
#Post#: 2404--------------------------------------------------
Re: Helping the builders who have yet to start
DIR By: Adrian
Date: June 1, 2020, 4:15 pm
---------------------------------------------------------
Me too. Midlands area
#Post#: 2481--------------------------------------------------
Re: Helping the builders who have yet to start
DIR By: guest90
Date: June 17, 2020, 3:13 am
---------------------------------------------------------
Good morning! I have just joined the forum - please can someone
point me to a any specs or regs concerning the
construction/performance of a cycle kart eligible for UK events?
Many thanks, Richard.
#Post#: 2482--------------------------------------------------
Re: Helping the builders who have yet to start
DIR By: TheGiantTribble
Date: June 17, 2020, 3:27 am
---------------------------------------------------------
Good morning Richard and welcome.
CK guidelines/rules can be found here...
HTML http://www.cyclekartsgb.com/what-is-a-cyclekart/what-is-a-cyclekart-and-rulesguidelines/
Or simply put, Honda GX200 or clone, allowed to go to stage 1
mods, so max 9.5 - 10 HP, I don't think any of us have actually
felt the need to do this, all I've done is changed to a tuned
exhaust to give a boost to low revs torque, and removed the
screw that keeps it's revs to 3500, I think I get all of an
extra 300 RPM! Others have changed carbs.
If I could suggest go with bog standard engine, drive the wheels
off it, have a blast, and change things as and when you feel you
must :-)
#Post#: 2483--------------------------------------------------
Re: Helping the builders who have yet to start
DIR By: guest90
Date: June 17, 2020, 3:30 am
---------------------------------------------------------
Many thanks for the link, and the advice - I will check it out
Regards,
Richard
#Post#: 4869--------------------------------------------------
Re: Helping the builders who have yet to start
DIR By: Nic
Date: October 13, 2021, 3:41 pm
---------------------------------------------------------
Am in sussex and am starting a build, i intend to make a few
youtube videos.
*****************************************************
Page 1 of 2
DIR Next Page