DIR Return Create A Forum - Home
       ---------------------------------------------------------
       CycleKarts GB
  HTML https://cyclekartsgb.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Tech Forum
       *****************************************************
       #Post#: 13161--------------------------------------------------
       More speed.
       By: DavidandCarolynne Date: May 13, 2025, 9:30 am
       ---------------------------------------------------------
       We've had a run up and down the street and all is good except.
       Damn it's slow.
       We still have the governor in place.  So we'll get that out in
       the next few days.
       We also have the stock carb in place.
       I've witnessed you lot giving it some around Stretton and you're
       a lot quicker than us.
       Any other suggestions for a bit more 'go'?
       Smaller axle sprocket?
       #Post#: 13162--------------------------------------------------
       Re: More speed.
       By: Jimr1999 Date: May 13, 2025, 1:59 pm
       ---------------------------------------------------------
       Ratio between TAV and Axle about 1:7, eg 10 at TAV and 70 on
       Axle, re jet standard carb up if you have a better exhaust and
       air filter to 90 ISH +or - , if you take the governor out, 18lb
       valve springs, while not essential, are a good option if you hit
       high revs to prevent valve bounce
       #Post#: 13402--------------------------------------------------
       Re: More speed.
       By: tim.wheater Date: July 1, 2025, 5:58 am
       ---------------------------------------------------------
       Getting that governor out is your first port of call it will
       make a massive difference.
       *****************************************************