URI:
   DIR Return Create A Forum - Home
       ---------------------------------------------------------
       CycleKarts GB
  HTML https://cyclekartsgb.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Tech Forum
       *****************************************************
       #Post#: 11458--------------------------------------------------
       Steering box
       By: Snakey Date: August 20, 2024, 4:01 pm
       ---------------------------------------------------------
       In common with many cars of the time, my 'inspiration' car has a
       very conspicuous Pitman arm and draglink, from a steering box
       located low down on the engine firewall. I would imagine that
       someone, somewhere, will have reproduced this arrangement on a
       kart but I've been unable to find an example. Car steering boxes
       are way too big and heavy, and my newbie imagination can't come
       up with a diy alternative. Help, anyone?
       #Post#: 11459--------------------------------------------------
       Re: Steering box
       By: Mark Under Date: August 20, 2024, 4:33 pm
       ---------------------------------------------------------
       My kart has a steering box, I was lucky to find a gearbox from a
       Mr Whippy machine for £11 on eBay.
       The gearing is difficult to get right, the steering on my kart
       is quite heavy!
       #Post#: 11460--------------------------------------------------
       Re: Steering box
       By: StefanN Date: August 20, 2024, 5:32 pm
       ---------------------------------------------------------
       You could have a drag link and drop arm that simply follow the
       steering with actual steering being done via the tie rods.
       #Post#: 11462--------------------------------------------------
       Re: Steering box
       By: Moogie38 Date: August 20, 2024, 9:07 pm
       ---------------------------------------------------------
       On my cyclekart I use go kart style steering setup.
       [attachimg=1]
       To keep the appearance of the inspiration car i made an
       imitation steering box from bits of pipe with 3d printed parts.
       [attachimg=2]
       [attachimg=3]
       #Post#: 11469--------------------------------------------------
       Re: Steering box
       By: Snakey Date: August 22, 2024, 4:55 am
       ---------------------------------------------------------
       Thanks all, especially for the pics (always welcome to Someone
       Who Knows Nothing!). Guess Mark wins this one, although I'm a
       little short of underworld contacts to mount a blag on the local
       ice-cream van. Off to the scrappers now...
       #Post#: 11501--------------------------------------------------
       Re: Steering box
       By: tim.wheater Date: August 28, 2024, 4:31 am
       ---------------------------------------------------------
       Moogy, I spy a glow plug ;)
       #Post#: 11503--------------------------------------------------
       Re: Steering box
       By: Moogie38 Date: August 28, 2024, 5:09 am
       ---------------------------------------------------------
       Tim.
       *****************************************************