DIR Return Create A Forum - Home
---------------------------------------------------------
CycleKarts GB
HTML https://cyclekartsgb.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Tech Forum
*****************************************************
#Post#: 10744--------------------------------------------------
installing engine
By: max cliff Date: March 24, 2024, 9:00 am
---------------------------------------------------------
Greeting all just mocking up my engine and tav30
any advice would be good, does this look okay main issue i see
is will have to remove some of the strengthing ribs on the tc
plate
to allow room for the chain will this be okay many thanks max
#Post#: 10745--------------------------------------------------
Re: installing engine
By: NewbieNick Date: March 24, 2024, 10:35 am
---------------------------------------------------------
Hi Max, if you have room to rotate the tav 180 degrees you will
get chain clearance without removing any of the backing plate.
There’s a picture of what I mean on page 6 of my build
journal,MG Mtype
Good luck Nick
#Post#: 10746--------------------------------------------------
Re: installing engine
By: max cliff Date: March 24, 2024, 1:14 pm
---------------------------------------------------------
thanks Nick will have a look
#Post#: 10748--------------------------------------------------
Re: installing engine
By: jay pratt Date: March 24, 2024, 4:14 pm
---------------------------------------------------------
I have mine at a similar angle and have had no issues so far, it
seems fairly common to cut some ribs off.
*****************************************************