DIR Return Create A Forum - Home
---------------------------------------------------------
CycleKarts GB
HTML https://cyclekartsgb.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Build journals
*****************************************************
#Post#: 10216--------------------------------------------------
Wragg racer twin cam Austin 7
By: tim.wheater Date: January 29, 2024, 2:16 pm
---------------------------------------------------------
The plan , a white board and a dose of make it up as you are
going along, the only purchased steel was the front axle, the
rest is recycled , made extra work but my time is free 😀
#Post#: 10217--------------------------------------------------
Re: Wragg racer twin cam Austin 7
By: tim.wheater Date: January 29, 2024, 2:19 pm
---------------------------------------------------------
Wheels and manufacture of the rear hubs for a 40mm axle
#Post#: 10218--------------------------------------------------
Re: Wragg racer twin cam Austin 7
By: tim.wheater Date: January 29, 2024, 2:21 pm
---------------------------------------------------------
Rear axle hangars
#Post#: 10219--------------------------------------------------
Re: Wragg racer twin cam Austin 7
By: tim.wheater Date: January 29, 2024, 2:22 pm
---------------------------------------------------------
Shortened kart stub axles
#Post#: 10220--------------------------------------------------
Re: Wragg racer twin cam Austin 7
By: tim.wheater Date: January 29, 2024, 2:24 pm
---------------------------------------------------------
Front axle , jig made to try and keep everything square, castor
and camber the same on both sides, seems to have been
successful
#Post#: 10221--------------------------------------------------
Re: Wragg racer twin cam Austin 7
By: tim.wheater Date: January 29, 2024, 2:25 pm
---------------------------------------------------------
3d printed instrument , not functional but look the part
#Post#: 10222--------------------------------------------------
Re: Wragg racer twin cam Austin 7
By: tim.wheater Date: January 29, 2024, 2:27 pm
---------------------------------------------------------
Dimple die to put a flange on lightening holes
#Post#: 10223--------------------------------------------------
Re: Wragg racer twin cam Austin 7
By: tim.wheater Date: January 29, 2024, 2:31 pm
---------------------------------------------------------
Steering wheel with quick release hub , spokes cut from
aluminum, ply bonded on routered, sanded and varnished
#Post#: 10224--------------------------------------------------
Re: Wragg racer twin cam Austin 7
By: tim.wheater Date: January 29, 2024, 2:34 pm
---------------------------------------------------------
Seat constructed out of old sofa leather, aluminium and a steel
frame
#Post#: 10225--------------------------------------------------
Re: Wragg racer twin cam Austin 7
By: tim.wheater Date: January 29, 2024, 2:36 pm
---------------------------------------------------------
Rolling chassis
*****************************************************
DIR Next Page