DIR Return Create A Forum - Home
---------------------------------------------------------
CycleKarts GB
HTML https://cyclekartsgb.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Where to get stuff
*****************************************************
#Post#: 9402--------------------------------------------------
Friction Damper Laser Cut Plates
By: Mark Under Date: September 24, 2023, 12:20 pm
---------------------------------------------------------
I have had some Friction Damper Plates laser cut if anyone is
interested.
6 plates are required to make up a pair for a cycle kart.
These were cut using a template kindly supplied by Glynn.
A set of 6 plates works out at £10, I will be at Wilton Mill and
Stretton should anyone be interested.
Mark
#Post#: 9403--------------------------------------------------
Re: Friction Damper Laser Cut Plates
By: jim Date: September 24, 2023, 11:59 pm
---------------------------------------------------------
Hi Mark, They look cool. I will have 2 sets please and I'll give
you the £20 at Whilton (if it doesn't get cancelled) and
Stretton if I go.
#Post#: 9404--------------------------------------------------
Re: Friction Damper Laser Cut Plates
By: NewbieNick Date: September 25, 2023, 1:24 am
---------------------------------------------------------
Hi Mark, they look better than my home cut attempts. Put me down
for a set please, I have printed stickers for these at 68 mm
diameter printed on marine grade self adhesive vinyl. If these
will fit yours & you want some let me know, that applies to
every member. If they dont fit i could get the file resized &
printed if enough people interested.
Hope to be going to Whilton Mill , just need to get insurance
sorted
Cheers Nick
#Post#: 9411--------------------------------------------------
Re: Friction Damper Laser Cut Plates
By: sylvaman Date: September 25, 2023, 11:49 am
---------------------------------------------------------
Well done Mark . Set for me please.
#Post#: 9412--------------------------------------------------
Re: Friction Damper Laser Cut Plates
By: Graham Hill Date: September 25, 2023, 1:12 pm
---------------------------------------------------------
Yes set for me as well Mark please. ..... are there any left??
#Post#: 9705--------------------------------------------------
Re: Friction Damper Laser Cut Plates
By: RMB Date: November 1, 2023, 8:25 am
---------------------------------------------------------
Hi Mark,
are any of these left, if so would it possible for me to a set?
#Post#: 9720--------------------------------------------------
Re: Friction Damper Laser Cut Plates
By: Mark Under Date: November 4, 2023, 2:05 pm
---------------------------------------------------------
I will bring the plates to Stretton, there should be enough for
everyone.
Mark
#Post#: 11770--------------------------------------------------
Re: Friction Damper Laser Cut Plates
By: robert.mann Date: October 25, 2024, 1:10 pm
---------------------------------------------------------
Hi Mark
Do you have any set still for sale as I will need a set for my
build also will you post or I can arrange pick up by parcel
force.
Many thanks
Rob
#Post#: 11772--------------------------------------------------
Re: Friction Damper Laser Cut Plates
By: Mark Under Date: October 25, 2024, 1:44 pm
---------------------------------------------------------
Rob
I still have them the easiest way is to purchase on EBay,
They are now listed with stickers and star washers.
HTML https://www.ebay.co.uk/itm/285963447786?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=r2Gd_7jvSim&sssrc=2051273&ssuid=r2Gd_7jvSim&var=&widget_ver=artemis&media=COPY
#Post#: 11784--------------------------------------------------
Re: Friction Damper Laser Cut Plates
By: JeffH Date: October 28, 2024, 10:37 am
---------------------------------------------------------
Hi Mark, I just purchased a set from you. Is there anywhere on
here that explains how they go together or why I need 3 plates
per side? I understand I need a friction material in between the
plates, but that’s about the limit of my knowledge on these.
*****************************************************