DIR Return Create A Forum - Home
---------------------------------------------------------
Charliealphaco
HTML https://charliealphaco.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Gun Help
*****************************************************
#Post#: 2679--------------------------------------------------
Upgrading my A&K G300
By: lilc Date: April 5, 2011, 12:49 pm
---------------------------------------------------------
my looking for accuracy and ROF. im also thinking of downgrading
it cause it shoots hot at about 422 fps. any advice please
comment.
#Post#: 2713--------------------------------------------------
Re: Upgrading my A&K G300
By: Carignan1022 Date: April 5, 2011, 7:55 pm
---------------------------------------------------------
Well, there are several different upgrades or changers you can
do for you gun. First if you think it is shooting to hot for you
right now, then a ported cylinder would help with that. It will
most likely decrease you FPS but in turn your ROF goes up. This
is because there is less resistance on the piston, thus it will
go faster. With accuracy in mind, the best would be a tight bore
barrel, and a good hop up. Then play with ammo with the new set
up, if it is shooting hot, you can have heaver BB's, thus better
accuracy. I would say this would be the first three things I
would look into with new parts. Also on another note, you need
to make sure that your barrel and cylinder match. If your barrel
is to long or to short with the corresponding cylinder, your
accuracy, ROF, will go down. Plus this could also hurt your gun.
I can talk to you more about matching the right parts for your
gun, and what you want.
#Post#: 2714--------------------------------------------------
Re: Upgrading my A&K G300
By: lilc Date: April 5, 2011, 8:06 pm
---------------------------------------------------------
WELL i was thinkin of getting a m113 spring to decrease fps
350-380 and i think i need a longer barrel its about 420mm. i
want a 509mm 6.03 PB. and im getting a larger voltage. one
problem is i cant find any videos on how to take it apart so im
flying blind for the moment. also my hop up is iffy i want a new
one ive been recomended a G&P.
*****************************************************