DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: GTG and Competition dates - Lumberjack World Record...
*****************************************************
#Post#: 8525--------------------------------------------------
tn gtg/build off june 16th
DIR By: tlandrum2002
Date: April 8, 2012, 10:54 am
---------------------------------------------------------
june 16th TN gtg,4 cube build off ,racing ,general cookie
cutting ,food and fun
well here are the days activities. im going to try and make this
gtg a little different than my usual gtg.
were going to have plenty of wood for everyone to cut cookies
on,all different sizes and species of wood for long bars and
short bars,big saws and small saws,old saws and new saws.
this year i plan to have lots of square wood to race in. we will
be having races all day long. i plan to have stock saw,stock
appearing gas,stock appearing alky,pipe saw,stock chain
races,race chain on stock saw races,3,4,5,cube races,open hot
saw. you name it we will race it,got a rooster and a saddle
we'll race it. this will be cold start ,hot start on ground,hot
start over the wood,you name it..if stumpy wants to race in a
thong we'll let him.lol anyone that plans to join in the races
will need to buy in to help pay for the cants. id say $10 per
person to cover the cants.
this year instead of everyone bringing food or us grilling we
will be ordering pizza.we will charge $5 per head for food and
drink. i think that would be fair. there will be bottled water
on ice all day for every one to drink included in the $5.
i will be getting a circus tent again this year for us to get
out of the sun or rain . i will be setting up one circus tent
over the top of the wood for the cant racing ,so that we can
race, rain or shine all day long.anyone that has pop up tents
can set it up if they want.
anyone that wants to come early and camp out is welcome. we
usually have a bon fire and food the night before. adult
beverages are allowed night before gtg and after gtg.ABSOLUTELTY
NOT DURING THE GTG.
i hope everyone that wants to attend can make it a point to come
and join in this years fun.
build off rules
the saw must fit in the 3.01 to 4.00 cube class
any brand you want to use
1 the saw must be visually stock appearing with all covers in
place and no extra holes
2 you can use any piston cylinder combo oem or aftermarket as
long as it fits in 4 cube
3 you must use production chainsaw parts for intake (rubber boot
or plastic block from a
factory saw produced saw)
4 muffler can not have pipes longer than 3/4 inch
5 you can use any chainsaw carb you wish to use as long as it
has a working/functional
choke and true to the saw filter
6 run whatever sprocket you want
7 we will use 16'' bars
8 send the saw with your own choice of brand round ground chain.
You can sharpen the
chain and set rakers for the best cut on your saw.
9 no suqare ground chain
10 no chassy work on the chain (no thinning,no dog boning,no
tunneling,no stoning ,no
spinnign down rivets)
11 saw must run on 93 octane gas and 32:1 mix
12 saw must be tuned and ready before it gets to the cutting
block
13 there will be one designated saw operator
14 there will be 3 down cuts
15 there will be 3 timers,slowest time thrown out last two
averaged,best cut of the 3 counts
16 there will be no whining,moaning,generall pain in my arse
biotching about the results
THE ENTRY FEE WILL BE $20 PER SAW TO COVER THE CANT AND THE FUEL
AND PRIZES
#Post#: 8527--------------------------------------------------
Re: tn gtg/build off june 16th
DIR By: Chainsawrepair
Date: April 8, 2012, 1:37 pm
---------------------------------------------------------
--- Quote from: tlandrum2002 link ---
>
>
> build off rules
>
> the saw must fit in the 3.01 to 4.00 cube class
>
>
>
>
>
> 15 there will be 3 timers,lowest time thrown out last two
averaged,best cut of the 3 counts
>
>
>
>
>
--- End Quote ---
Terry that is a very odd rule. I have seen 3 timers used and you
get a 1.40 1.48 and a 1.70. Why in the world throw out the
fastest time and average 1.48 and 1.70. You know 1.40 and 1.48
are the more accurate times.
Only time your way would be right IF you had a 1.40 and then
1.70 and 1.78. Then your way of thinking would be right.
We always used the 2 closest times together. Didnt matter if it
was the fastest or slowest that got tossed. Just makes more
since if you really want accuracy in times. JMO of been there
done that. ;)
#Post#: 8537--------------------------------------------------
Re: tn gtg/build off june 16th
DIR By: rms61moparman
Date: April 8, 2012, 6:49 pm
---------------------------------------------------------
I thought he was saying the slowest, which would be the lowest
in a decending order, would be tossed and the two fastest times
averaged...........but I could be wrong once again.
Mike
#Post#: 8539--------------------------------------------------
Re: tn gtg/build off june 16th
DIR By: tlandrum2002
Date: April 8, 2012, 8:11 pm
---------------------------------------------------------
your correct mike
#Post#: 8540--------------------------------------------------
Re: tn gtg/build off june 16th
DIR By: Chainsawrepair
Date: April 8, 2012, 8:18 pm
---------------------------------------------------------
Thats what I was showing you fastest and slowest thrown out. I
would take the 2 watches that are close to each other. 1 person
could be fast on the watch or 1 slow on the watch. Take the 2
that are together in times. 1.40 1.48 1.70 or 1.40 1.70
1.78.
So you would keep 1.40 1.48 on one or 1.70 1.78 on other
one. Just telling you from experience.
Do what you want :)
*****************************************************
Page 1 of 1