DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: GTG and Competition dates - Lumberjack World Record...
*****************************************************
#Post#: 91499--------------------------------------------------
KY Lake Lumberjack event
By: Chainsawrepair Date: July 14, 2025, 5:53 am
---------------------------------------------------------
KY Lake lumberjack event info is starting to be let out.
Replacing the Murray event I used to love to go to.
3rd weekend in Oct.
Per Melissa and Samuel. =
General Rules
All contestants need to check in at the lumberjack arena and
confirm registration and sign a release from before the
beginning of the competition. All contestants must be registered
to compete and competition will begin at 10:30 a.m.
All timing will done electronically with CMV app. and any times
resulting in a tie for any the top places will require a
saw-off.
Timing on all chain saw and crosscut events will start when the
hands move, and finish when the last piece of wood is severed
free from the log. A starters cadence will be used Timers Ready,
Competitors Ready, 3,2,1, go.
Leg, hearing and eye protection must be worn in all sawing
events.
Event decision are up the discretion of the judge. All judges
decision are final.
Underhand Chop
Using a single-bit axe, competitors will chop through a
horizontal 8x8 yellow-poplar cant. Cuts are made with the
competitors standing on the log and will begin with the
starters' signal time will start when the axe hits the wood and
end with the log is severed.
Standing Block Chop
Using a single-bit axe, competitors will chop through a vertical
standing 8x8 yellow-poplar cant. The contest will begin with the
starter signal, time will begin when axe hits the wood and ends
when the piece is severed.
Axe Throw
Four throws from behind a line of 20 feet from the target with a
bullseye about 5 feet above the ground level. Ladies and
children my throw from 15 feet. Score will be best of the 4
throws.
Only one point of the axe in the wood counts. Double Point stick
is "no score" for the throw. Point of scoring (by judges) are 5
points for a bulls-eye, 4 points for the next outermost circle,3
points for the next outermost circle, 2 point for the next
outermost circle and 1 point for the outermost circle, A cut ine
between circles is awarede the higer circle of points.
If a competitors foot hits the ground past the throwing line
before the axe hits the wood, that particular throw will receive
a "no score"
Ties will be broken by a throw off. The loser of tied score
throw off takes over the next scoring place, bumping contestants
score along to fill the first five finishing places. Axe should
be a double bitted, at least 21/2 pound head with minimum 24"
overall handle length, the face of the blade not to exceed 6
inches.
Crosscut Sawing
An individual contestant my enter the crosscut sawing only once
in each event. Pieces to be sawn will be 8x8 yellow poplar
cants. one line will be saw through the log (Jack and Jill, Jill
and Jill and single buck) 2 lines for (two man) Each sawing team
may have one "second" or manager. Any chip, slab or "hang" with
an uncut end of 1\2 inch or more will cause contestant to
receive a no time.
Husqvarna Stock Saw
Chainsaw for the Contest will be provided and adjusted by>>>>>>.
The competitor may not adjust the saw in any way. Leg, eye and
hearing protection will be provided if needed. The saws will be
started and running on ground level and will require three
vertical cuts- down, up and down in a 6 inch space marked
completely around the log. The pieces will be cut from 8x8
yellow-poplar cants, producing three complete pieces of wood.
Time will start when the hands move and end when the third piece
is severed.
Stock Appearing
Each contestant may only run once in a class. Saws will
belimited to one cylinder, pull start and must be stock
appearing (no Over sized mufflers, etc and must have all factory
plastic attached) Contestants will supply their own fuel. Saws
will be checked for classes and pieces to be cut will be 8x8
poplar cants.
Saws will have a maximin of one minute to be started and warmed
up with mechanical adjustments and or malfunctions included.
Contest will start with the saws off and resting at ground level
with contestant's hand flat on top of the wood with both thumbs
touching a line drawn the middle of the piece to be cut.
Three lines will be cut- down,up,down.
The judges will mark a 6" wide area completely around the log
and the cuts must produce three complete pieces of wood. Cutouts
will cause contestants to receive a "no time"
Leg, hearing and eye protection must be worn. Any contestant not
wearing proper protection will be disqualified.
A starters cadence will be used but time will start when the
hands move and the Third complete cut is made.
Hot Saw
Saws must be a serial numbered production chain saw engine with
any modification allowed. Contests will start with the saws off
and resting at ground level with contestants hands flat on top
of the wood. The contest will require three vertical cuts down,
up and down with in a 6 inch wide space marked completely around
the log. The pieces will be cut from a 8x8 yellow-poplar cant.
producing 3 complete pieces of wood.
A starting cadence will be used, time starts when hands move on
top of the wood and end when third complete piece is severed.
#Post#: 91507--------------------------------------------------
Re: KY Lake Lumberjack event
By: Chainsawrepair Date: July 17, 2025, 2:02 pm
---------------------------------------------------------
General Rules
All contestants need to check in at the lumberjack arena and
confirm registration and sign a release from before the
beginning of the competition. All contestants must be
registered to compete and competition will begin at 10:30 a.m.
All timing will done electronically with CMV app. and any times
resulting in a tie for any the top places will require a
saw-off.
Timing on all chain saw and crosscut events will start when the
hands move, and finish when the last piece of wood is severed
free from the log. A starters cadence will be used Timers
Ready, Competitors Ready, 3,2,1, go.
Leg, hearing and eye protection must be worn in all sawing
events.
Event decision are up the discretion of the judge. All judges
decision are final.
Underhand Chop
Using a single-bit axe, competitors will chop through a
horizontal 8x8 yellow-poplar cant. Cuts are made with the
competitors standing on the log and will begin with the
starters' signal time will start when the axe hits the wood and
end with the log is severed.
Standing Block Chop
Using a single-bit axe, competitors will chop through a vertical
standing 8x8 yellow-poplar cant. The contest will begin with the
starter signal, time will begin when axe hits the wood and ends
when the piece is severed.
Axe Throw
Four throws from behind a line of 20 feet from the target with a
bullseye about 5 feet above the ground level. Ladies and
children my throw from 15 feet. Score will be best of the 4
throws.
Only one point of the axe in the wood counts. Double Point stick
is "no score" for the throw. Point of scoring (by judges) are 5
points for a bulls-eye, 4 points for the next outermost circle,3
points for the next outermost circle, 2 point for the next
outermost circle and 1 point for the outermost circle, A cut ine
between circles is awarede the higer circle of points.
If a competitors foot hits the ground past the throwing line
before the axe hits the wood, that particular throw will receive
a "no score"
Ties will be broken by a throw off. The loser of tied score
throw off takes over the next scoring place, bumping contestants
score along to fill the first five finishing places. Axe should
be a double bitted, at least 21/2 pound head with minimum 24"
overall handle length, the face of the blade not to exceed 6
inches.
Crosscut Sawing
An individual contestant my enter the crosscut sawing only once
in each event. Pieces to be sawn will be 8x8 yellow poplar
cants. one line will be saw through the log (Jack and Jill, Jill
and Jill and single buck) 2 lines for (two man) Each sawing
team may have one "second" or manager. Any chip, slab or "hang"
with an uncut end of 1\2 inch or more will cause contestant to
receive a no time.
Husqvarna Stock Saw
Chainsaw for the Contest will be provided and adjusted by>>>>>>.
The competitor may not adjust the saw in any way. Leg, eye and
hearing protection will be provided if needed. The saws will be
started and running on ground level and will require three
vertical cuts- down, up and down in a 6 inch space marked
completely around the log. The pieces will be cut from 8x8
yellow-poplar cants, producing three complete pieces of wood.
Time will start when the hands move and end when the third piece
is severed.
Stock Appearing
Each contestant may only run once in a class. Saws will
belimited to one cylinder, pull start and must be stock
appearing (no Over sized mufflers, etc and must have all factory
plastic attached) Contestants will supply their own fuel. Saws
will be checked for classes and pieces to be cut will be 8x8
poplar cants.
Saws will have a maximin of one minute to be started and warmed
up with mechanical adjustments and or malfunctions included.
Contest will start with the saws off and resting at ground level
with contestant's hand flat on top of the wood with both thumbs
touching a line drawn the middle of the piece to be cut.
Three lines will be cut- down,up,down.
The judges will mark a 6" wide area completely around the log
and the cuts must produce three complete pieces of wood. Cutouts
will cause contestants to receive a "no time"
Leg, hearing and eye protection must be worn. Any contestant not
wearing proper protection will be disqualified.
A starters cadence will be used but time will start when the
hands move and the Third complete cut is made.
Hot Saw
Saws must be a serial numbered production chain saw engine with
any modification allowed up to 140 cc. Contests will start with
the saws off and resting at ground level with contestants hands
flat on top of the wood. The contest will require three vertical
cuts down, up and down with in a 6 inch wide space marked
completely around the log. The pieces will be cut from a 8x8
yellow-poplar cant. producing 3 complete pieces of wood.
A starting cadence will be used, time starts when hands move on
top of the wood and end when third complete piece is severed.
*****************************************************